DataSheetWiki


EPC2 fiches techniques PDF

Altera Corporation - Configuration Devices

Numéro de référence EPC2
Description Configuration Devices
Fabricant Altera Corporation 
Logo Altera Corporation 





1 Page

No Preview Available !





EPC2 fiche technique
December 2002, ver. 12.2
Configuration Devices for
® SRAM-Based LUT Devices
Data Sheet
Features
Serial device family for configuring APEXTM II, APEX 20K (including
APEX 20K, APEX 20KC, and APEX 20KE), MercuryTM, ACEX® 1K,
and FLEX® (FLEX 6000, FLEX 10KE, and FLEX 10KA) devices
Easy-to-use 4-pin interface to APEX II, APEX 20K, Mercury, ACEX,
and FLEX devices
Low current during configuration and near-zero standby current
5.0-V and 3.3-V operation
Software design support with the Altera® Quartus® II and
MAX+PLUS® II development systems for Windows-based PCs as
well as Sun SPARCstation, and HP 9000 Series 700/800
Programming support with Altera’s Master Programming Unit
(MPU) and programming hardware from Data I/O,
BP Microsystems, and other manufacturers
Available in compact plastic packages (see Figures 1 and 2)
– 8-pin plastic dual in-line package (PDIP)
– 20-pin plastic J-lead chip carrier (PLCC) package
– 32-pin plastic thin quad flat pack (TQFP) package
– 100-pin plastic thin quad flat pack (TQPF) package
www.DataSheet.co.kr
– 88-pin Ultra FineLine BGATM package
EPC2 device has reprogrammable Flash configuration memory
– 5.0-V and 3.3-V in-system programmability (ISP) through the
built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG)
interface
– Built-in JTAG boundary-scan test (BST) circuitry compliant with
IEEE Std. 1149.1
– ISP circuitry is compatible with IEEE Std. 1532 for EPC2
configuration device
– Supports programming through Serial Vector Format Files
(.svf), JamTM Standard Test and Programming Language
(STAPL) Files (.jam), Jam STAPL Byte-Code Files (.jbc), and the
MAX+PLUS II software via the MasterBlasterTM,
ByteBlasterMVTM, or BitBlasterTM download cable
nINIT_CONF pin allows a JTAG instruction to initiate device
configuration
– Can be programmed with Programmer Object Files (.pof) for
EPC1 and EPC1441 devices
– Available in 20-pin PLCC and 32-pin TQFP packages
Altera Corporation
DS-EPROM-12.2
1
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 30
Télécharger [ EPC2 ]


Fiche technique recommandé

No Description détaillée Fabricant
EPC1 Configuration Devices Altera Corporation
Altera Corporation
EPC10 EPC Cores ACME
ACME
EPC1001 Enhancement Mode Power Transistor EPC
EPC
EPC1005 Enhancement Mode Power Transistor EPC
EPC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche