DataSheetWiki


MAX16127 fiches techniques PDF

Maxim Integrated Products - (MAX16126 / MAX16127) Load-Dump/Reverse-Voltage Protection Circuits

Numéro de référence MAX16127
Description (MAX16126 / MAX16127) Load-Dump/Reverse-Voltage Protection Circuits
Fabricant Maxim Integrated Products 
Logo Maxim Integrated Products 





1 Page

No Preview Available !





MAX16127 fiche technique
www.DataSheet.co.kr
19-6053; Rev 0; 11/11
MAX16126/MAX16127
Load-Dump/Reverse-Voltage Protection Circuits
General Description
The MAX16126/MAX16127 load-dump/reverse-voltage
protection circuits protect power supplies from dam-
aging input voltage conditions, including overvoltage,
reverse-voltage, and high-voltage transient pulses. Using
a built-in charge pump, the devices control two exter-
nal back-to-back n-channel MOSFETs that turn off and
isolate downstream power supplies during damaging
input conditions, such as an automotive load-dump pulse
or a reverse-battery condition. Operation is guaranteed
down to 3V to ensure proper operation during automo-
tive cold-crank conditions. These devices feature a flag
output (FLAG) that asserts during fault conditions.
For reverse-voltage protection, external back-to-back
MOSFETs outperform the traditional reverse-battery
diode, minimizing the voltage drop and power dissipa-
tion during normal operation.
The MAX16126/MAX16127 use external resistors to
adjust the overvoltage and undervoltage comparator
thresholds for maximum flexibility.
The MAX16127 provides limiter-mode fault manage-
ment for overvoltage and thermal shutdown conditions;
whereas the MAX16126 provides switch-mode fault
management for overvoltage and thermal shutdown con-
ditions. In the limiter mode, the output voltage is limited
and FLAG is asserted low during a fault. In the switch
mode, the external MOSFETs are switched off and FLAG
is asserted low after a fault. The switch mode is available
in four options: latch mode, 1 autoretry mode, 3 autoretry
mode, and always autoretry mode.
The MAX16126/MAX16127 are available in 12-pin TQFN
packages. These devices operate over the automotive
temperature range (-40NC to +125NC).
Applications
Automotive
Industrial
Avionics
Telecom/Server/Networking
Benefits and Features
S Operates Down to +3V, Riding Out Cold-Crank
Conditions
S -30V to +90V Wide Input Voltage Protection Range
S Minimal Operating Voltage Drop Reverse-Voltage
Protection
S Fast Gate Shutoff During Fault Conditions with
Complete Load Isolation
S Adjustable Undervoltage/Overvoltage Thresholds
S Thermal Shutdown Protection
S Low Supply Current and Low Shutdown Current
S Charge-Pump Circuit Enhances External
n-Channel MOSFETs
S FLAG Output Identifies Fault Condition
S Automotive Qualified
S -40NC to +125NC Operating Temperature Range
S Available in 3mm x 3mm, 12-Pin TQFN Package
Ordering Information appears at end of data sheet.
For related parts and recommended products to use with this part,
refer to www.maxim-ic.com/MAX16126.related.
����������������������������������������������������������������� Maxim Integrated Products  1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Datasheet pdf - http://www.DataSheet4U.net/

PagesPages 19
Télécharger [ MAX16127 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1612 Bridge-Battery Backup Controllers for Notebooks Maxim Integrated
Maxim Integrated
MAX16122 Dual Pushbutton Controllers Maxim Integrated
Maxim Integrated
MAX16123 Dual Pushbutton Controllers Maxim Integrated
Maxim Integrated
MAX16124 Dual Pushbutton Controllers Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche