|
|
Numéro de référence | ILP3FCD | ||
Description | Sealed pushbutton switches | ||
Fabricant | APEM | ||
Logo | |||
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications
K Momentary pushbuttons for thick panels
K Illuminated or non-illuminated
K Tactile feedback
K Flat round actuator for optional marking
K Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
50mA 12VDC
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.000 Vrms
• Electrical life at full load : 500.000 cycles
GENERAL SPECIFICATIONS
• Panel thickness : 1,50 mm (.059) min. - 10 mm (.393) max.
• Total travel : 1,7 mm (.067) +/- 0,3 mm
• Typical operating force : 4N +/- 2N
• Mechanical life : 1.000.000 cycles
• Torque : 1 Nm max. applied to nut
• Soldering : 300°C max. for 3 seconds
Panel cut-out
MOUNTING
Matrix mounting
MATERIALS
• Case : thermoplastic UL94-V0
• Actuator : polyamide 6/6
• Bushing/bezel : polyamide 6/6
• Contacts : brass, gold plated
• Terminal seal : epoxy
Back of panel space requirement
Flat seal
APEM
www.apem.com
1
Datasheet pdf - http://www.DataSheet4U.net/
|
|||
Pages | Pages 5 | ||
Télécharger | [ ILP3FCD ] |
No | Description détaillée | Fabricant |
ILP3FCD | Sealed pushbutton switches | APEM |
ILP3FCD | Sealed pushbutton switches | APEM |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |