DataSheet.es    


PDF LTD104EA5W Data sheet ( Hoja de datos )

Número de pieza LTD104EA5W
Descripción Display Module
Fabricantes Toshiba 
Logotipo Toshiba Logotipo



Hay una vista previa y un enlace de descarga de LTD104EA5W (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! LTD104EA5W Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
Toshiba Matsushita Display Technology Co., Ltd.
PRODUCTXINFORMATION
26cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LTD104EA5S
(p-Si TFT)
All information is subject to change without notice. Please read bottom notes.
FEATURES
(1) 10.4XGA(1024x768 pixels) display size for notebook PC
(2) LVDS interface system
TENTATIVE
(3) Light weight and Thinner design
RoHS compatible
MECHANICAL SPECIFICATIONS
Item Specifications
Dimensional Outline (typ.)
237.7(W) x 173.2(H) x 4.9max(D) mm
Number of Pixels
1024(W) x 768(H) pixels
Active Area
210.432(W) x 157.824(H) mm
Pixel Pitch
0.2055(W) x 0.2055(H)
Weight (approximately)
190 g
Backlight
Single CCFL, Sidelight type
*1 : Excepting the FL cable width
ABSOLUTE MAXIMUM RATXINGS
Item
Supply Voltage (VDD)
(VFL)
FL Driving Frequency (fFL)
Input Signal Voltage (VIN)
Operating Temperature
Storage Temperature
Storage Humidity
Min. Max. Unit
-0.3 4.0
V
0 2.0 kV(rms)
- 100 kHz
-0.3 VDD+0.3
V
0 50 °C
-20 60 °C
10 90 %(RH)
ELECTRICAL SPECIFICATION
Item
Min. Typ. Max. Unit
Remarks
Supply Voltage
(VDD)
3.0
3.3
3.6
V
FL Start Voltage (Ta=0°C)
(VFL)
---
---
600 --- V(rms) IFL=5.0mA(rms)
---
1300
V(rms) Ta=0
Differential Input Voltage High Threshold (VTH) VOS+0.1
---
---
Differential Input Voltage Low Threshold (VTL)
---
--- VOS-0.1
V VOS:offset mode voltage
V VOS=1.2V
Current Consumption
(IDD)
---
170
---
mA *2
(IFL) 2.0 --- 5.0 mA(rms) *3
Power Consumption
--- (3.7) ---
W IFL=5.0mA(rms) *2 *3
*1 : Refer to “Timing Chart” and LVDS (DS90C363) specifications by National Semiconductor Corporation.
*2 : 8 color bars pattern
*3 : Excepting the efficiency FL inverter
OPTICAL SPECIFICATION (Ta=25°C)
Item
Min. Typ. Max. Unit
Remarks
Contrast Ratio (CR)
100 --- --- ---
Response Time
(tON)
--- --- 50 ms
Luminance (L)
(tOFF)
--- ---
140 180
50 ms
---
cd/m2
IFL=5.0mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display
Technology before proceeding with the design of equipment incorporating this product.
(1/11)
2006-09-26 (Ver.2.1)
Datasheet pdf - http://www.DataSheet4U.net/

1 page




LTD104EA5W pdf
www.DataSheet.co.kr
TIMING CHART
(1) Vertical / Horizontal Sync Timing
VSYNC
HSYNC
DE
tvsu
tvp
ta
767 768
tvw
tvhd
HSYNC
DE
thw
thfp
th
twde
Pixel Data
12345
NCLK
tv
tvbp
th
tb
12
thbp
1024
LTD104EA5S
(5/11)
2006-09-26 (Ver.2.1)
Datasheet pdf - http://www.DataSheet4U.net/

5 Page





LTD104EA5W arduino
www.DataSheet.co.kr
LTD104EA5S
! FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed
in Engineering Information No.EE-D-001A,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display Technology's Standard LCD Modules have not been customized for operation in extreme
environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba Matsushita Display Technology's Standard LCD Modules have not been designed for operation in extreme
environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which
exceed Toshiba Matsushita Display Technology's published specification limits.
C) In addition, since Toshiba Matsushita Display Technology Standard LCD Modules have not been designed for use in
applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft
navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military
defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear
energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba Matsushita Display Technology doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD
panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATXINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be
damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
7) RECOMMENDED OPERATION CONDITIONS
The performance and quality of the LCD panel are warranted only when the LCD panel is used within “the recommended
operation conditions”. Toshiba Matsushita Display Technology Co., Ltd. never warrants the performance and quality of the
LCD panel when you use the LCD panel over “the recommended operation conditions”, although within “the absolute
maximum rating”.
To use the LCD panel over “the recommended operation conditions” may have bad influence on the characteristics and
reliability of the LCD panel and may shorten the life of the LCD panel.
Therefore, when designing the whole set, not to be over “the recommended operation conditions”, you should fully take care of
supply voltage change, characteristic of connection parts, serge of input-and-output line, and surrounding temperature.
8) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
(11/11)
2006-09-26 (Ver.2.1)
Datasheet pdf - http://www.DataSheet4U.net/

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet LTD104EA5W.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LTD104EA5RLCD ModuleToshiba
Toshiba
LTD104EA5SLCD ModuleToshiba
Toshiba
LTD104EA5S1LCD ModuleToshiba
Toshiba
LTD104EA5WDisplay ModuleToshiba
Toshiba

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar