|
|
PDF LV51140T Data sheet ( Hoja de datos )
| Número de pieza | LV51140T | |
| Descripción | 1-Cell Lithium-Ion Battery Protection IC | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LV51140T (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
Ordering number : ENA1024
LV51140T
CMOS IC
1-Cell Lithium-Ion Battery
Protection IC
Overview
The LV51140T is protection IC for rechargeable Li-ion battery by high withstand voltage CMOS process.
The LV51140T protect single-cell Li-ion battery from over-charge, over-discharge, charge over-current and discharge
over-current.
Features
• High accuracy detection voltage
• Delay time (internal adjustment)
• Low current consumption
• 0V cell battery charging function
Over-charge detection
Over-charge hysteresis
Over-discharge detection
Charge over-current detection
Discharge over-current detection
Operation
Over-discharge condition
±25mV
±25mV
±25%
±0.3V
±20mV
Typ. 3.0µA
Max. 0.1µA
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Supply voltage
Input voltage of VM
Output voltage of CO
Output voltage of DO
Power dissipation
Operating temperature
Storage temperature
Symbol
VDD
VM
VCO
VDO
PD
Topr
Tstg
Conditions
Ratings
VSS-0.3 to VSS+7
VDD-28 to VDD+0.3
VM-0.3 to VDD+0.3
VSS-0.3 to VDD+0.3
350
-40 to +85
-55 to +125
Unit
V
V
V
V
mW
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
51408 MS PC 20080204-S00020 No.A1024-1/13
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
LV51140T
Continued from preceding page.
• Current consumption on operation and shutdown --- [Circuit 4]
Set V1 = 3.5V and V2 = 0V on normal condition. IDD shows current consumption on operation Iopr.
Set V1 = V2 = 1.8V on over-discharge condition. IDD shows current consumption on shutdown Isdn.
• Co : Pch ON resistance, Co : Nch ON resistance --- [Circuit 5]
Set V1 = 3.5V, V2 = 0V and V3 = 3.0V. (V1-V3)/|ICo| is Pch ON resistance Rcop.
Set V1 = 4.6V, V2 = 0V and V3 = 0.5V. V3/|ICo| is Nch ON resistance Rcon.
• Do : Pch ON resistance, Do : Nch ON resistance --- [Circuit 5]
Set V1 = 3.5V, V2 = 0V and V4 = 3.0V. (V1-V4)/|IDo| is Pch ON resistance Rdop.
Set V1 = V2 = 1.8V and V4 = 0.5V. V4/|IDo| is Nch ON resistance Rdon.
• Discharge over-current release resistance --- [Circuit 5]
Set V1 = 3.5V, V2 = 0V at first. And then, set V2 = 1.0V. V2/|IVM| is discharge over-current release resistance Rdwn.
• Over-charge detection delay time, Release delay time 2 --- [Circuit 6]
Set V2 = 0V. Increase V1 from the voltage VC-0.2V to VC+0.2V rapidly within 10µs. Over-charge detection delay time
tc is the time needed for VCO to go "Low" just after the change of V1.
Next, set V2 = 1V and decrease V1 from VC+0.2V to VC-0.2V rapidly within 10µs. Over-charge release delay time trel
2 is the time needed for VCO to go "High" just after the change of V1.
• Over-discharge detection delay time, Release delay time 1 --- [Circuit 6]
Set V2 = 0V. Decrease V1 from the voltage Vdc+0.2V to Vdc-0.2V rapidly within 10µs. Over-discharge detection
delay time tdc is the time needed for VDO to go "Low" just after the change of V1.
Next, set V2 = -1V and increase V1 from Vdc-0.2V to Vdc+0.2V rapidly within 10µs. Release delay time 1 trel1 in case
of over-discharge is the time needed for VDO to go "High" just after the change of V1.
• Charge over-current detection delay time, Release delay time 1 --- [Circuit 6]
Set V1 = 3.5V and V2 = 0V. Decrease V2 from 0V to -1V rapidly within 10µs. Charge over-current delay time tic is the
time needed for VCO to go "Low" just after the change of V2.
Next, increase V2 from -1V to 0V rapidly within 10µs. Release delay time 1 trel1 in case of charge over-current is the
time needed for VCO to go "High" just after the change of V2.
• Discharge over-current detection delay time, Release delay time 1 --- [Circuit 6]
Set V1 = 3.5V and V2 = 0V. Increase V2 from 0V to 1V rapidly within 10µs. Discharge over-current delay time tidc is
the time needed for VDO to go "Low" just after the change of V2.
Next, decrease V2 from 1V to 0V rapidly within 10µs. Release delay time 1 trel1 in case of discharge over-current is the
time needed for VDO to go "High" just after the change of V2.
• Load short-circuiting detection delay time, Release delay time 1 --- [Circuit 6]
Set V1 = 3.5V and V2 = 0V. Increase V2 from 0V to 3.5V rapidly within 10µs. Load short-circuiting detection delay
time tshort is the time needed for VDO to go "Low" just after the change of V2.
Next, decrease V2 from 3.5V to 0V rapidly within 10µs. Release delay time 1 trel1 in case of load short-circuiting is the
time needed for VDO to go "High" just after the change of V2.
No.A1024-5/13
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
• Over-charge detection
Charger connected
VC
VDD VC-VHc
Vdc
LV51140T
Load connected
Load connected
Charger connected
Charger connected
VM
Vldc
VSS
VDD
DO
VSS
VDD
CO
VSS
VM
tc
trel2
tc
trel2
tc
trel2
VC : Over-charge detection voltage
Vdc : Over-discharge detection voltage
VHc : Over-charge hysteresis voltage
Vidc : Discharge over-current detection voltage
tc : Over-charge detection delay time
trel2 : Release delay time 2
No.A1024-11/13
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet LV51140T.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LV51140T | 1-Cell Lithium-Ion Battery Protection IC | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |