|
|
PDF LB11826 Data sheet ( Hoja de datos )
| Número de pieza | LB11826 | |
| Descripción | Three-Phase Brushless Motor Driver | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LB11826 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
Ordering number : EN7109A
LB11826
Monolithic Digital IC
For OA Products
Three-Phase Brushless Motor Driver
Overview
The LB11826 is a three-phase brushless motor driver that is optimal for driving drum and paper feed motors in laser
printers and plain paper copiers. This IC adopts a direct PWM drive technique for minimal power loss. Flexible control of
motor speed in response to an externally provided clock frequency (corresponding to the FG frequency) can be
implemented by using the LB11826 in conjunction with the Sanyo LB11825M.
Features
• Three-phase bipolar drive (30V, 2.5V)
• Direct PWM drive
• Built-in low side inductive kickback absorbing diode
• Speed discriminator + PLL speed control
• Speed locked state detection output
• Built-in forward/reverse switching circuit
• Full complement of built-in protection circuits, including current limiter circuit, thermal protection circuit, and motor
constraint protection circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Supply voltage
Output current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
IO max
Pd max1
Pd max2
Topr
Tstg
Conditions
T ≤ 500ms
Independent IC
When infinitely large heat sink
Ratings
30
2.5
3
20
-20 to +80
-55 to +150
Unit
V
A
W
W
°C
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
71608 MS PC/O0503AS (OT) No.7109-1/11
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
LB11826
Block Diagram and Peripheral Circuits
No.7109-5/11
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
LB11826
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of July, 2008. Specifications and information herein are subject
to change without notice.
PS No.7109-11/11
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LB11826.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LB11820 | Direct PWM Drive Brushless Pre-Driver for Household Appliance Motors |  Sanyo |
| LB11820M | Direct PWM Drive Brushless Pre-Driver for Household Appliance Motors | Sanyo |
| LB11822 | Three-Phase Brushless Motor Driver | Sanyo Semicon Device |
| LB11823M | Direct PWM Drive Brushless Motor Predriver for OA Products | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |