|
|
PDF KV-XS29M80 Data sheet ( Hoja de datos )
| Número de pieza | KV-XS29M80 | |
| Descripción | Color TV Service Manual | |
| Fabricantes | Sony | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KV-XS29M80 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
SERVICE MANUAL
MODEL
COMMANDER DEST. CHASSIS NO. MODEL
KV-XS29M80 RM-954 E
SCC-U13L-A
KV-XS29M97 RM-953 Hong Kong SCC-U17L-A
BG-3S CHASSIS
COMMANDER DEST. CHASSIS NO.
(RM-953) (RM-954)
TRINITRON ® COLOR TV
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
KV-XS29M80/XS29M97
RM-954
RM-953
SELF DIAGNOSTIC FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automatically
begin to flash.
The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER
lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot
be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past
problems and how often these problems occur.
1. DIAGNOSTIC TEST INDICATORS
When an errors occurs, the STANDBY/TIMER lamp will flash a set number of times to indicate the possible cause of the
problem. If there is more than one error, the lamp will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a “0”.
Diagnostic
Item
Description
No. of times
Self-diagnostic
STANDBY/TIMER display/Diagnostic
lamp flashes
result
Probable
Cause
Location
Detected
Symptoms
• Power does not
turn on
Does not light
— • Power cord is not plugged • Power does not come on.
in. • No power is supplied to the
• Fuse is burned out F4601 TV.
(F) • AC power supply is faulty.
• +B overcurrent
(OCP) or
overvoltage
(OVP)
• Vertical deflection
stopped
• Horizontal
deflection
overdrive
2 times
002:000 or
002:001~255
003:001~255
004:001~255
at the same time
• H.OUT Q511 is shorted. (A
board)
• IC701 is shorted. (C board)
• -13V is not supplied. (A
board)
• IC 503 faulty (A board)
• Power does not come on.
• Load on power line is
shorted.
• Has entered standby state
after horizontal raster.
• Vertical deflection pulse is
stopped.
• Power line is shorted or
power supply is stopped.
• White balance
failure (no
PICTURE)
5 times
005:000 or
005:001~225
• G2 is improperly adjusted.
(Note 2)
• CRT problem.
• Video OUT IC701 is faulty.
(C board)
• IC301 is faulty. (A board)
• No connection A board to C
board.
• No raster is generated.
• CRT cathode current
detection reference pulse
output is small.
• Micro reset
—
101:00 or
• Discharge CRT (C Board) • Power is shut down shortly,
101:001~225 • Static discharge
after this return back to
• External noise
normal.
• Detect Micro latch up.
Note 1: If a + B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously.
The symptom that is diagnosed first by the microcontroller is displayed on the screen.
Note 2: Refer to screen (G2) Adjustment in section 3-4 of this manual.
–5–
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
Connecting optional components (continued)
KV-XS29M93 (not used for this model.)
Antenna cable (not supplied)
Rear of TV
WOOFER
R
1
L Y CB CR
23
To Ú
(monitor
output)
VCR
To
antenna
Audio system
output or
To video and
audio inputs
To
audio
inputs
L(MONO)
(yellow) Audio/Video cable
R -L (MONO) (not supplied)
(white)
-R (red)
: Signal flow
Note
• If you select “DVD” on your TV screen, no signal will be output at the Ú
(monitor output) jacks (see page 12).
Connecting a DVD player using the … (video input) jacks
KV-XS29M80
DVD player
Rear of TV
LINE OUT
R-AUDIO-L VIDEO
Audio/Video cable
(not supplied)
KV-XS29M93
DVD player
1 23
L(MONO)
R
To … 1, or 2
(video input)
(yellow)
-L (MONO) (white)
-R (red)
: Signal flow
Rear of TV
LINE OUT
R-AUDIO-L VIDEO
Audio/Video cable
(not supplied)
8 Using Your New TV
1 23
L(MONO)
R
To … 1, 2, or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
: Signal flow
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
or
B Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
20
mm
3.8mm
AB
or
Note
• Use only the supplied screws. Use of other screws may damage the TV.
10 Using Your New TV
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet KV-XS29M80.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KV-XS29M80 | Color TV Service Manual | Sony |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |