|
|
PDF DCC-SC01HD32 Data sheet ( Hoja de datos )
| Número de pieza | DCC-SC01HD32 | |
| Descripción | Color HD(720p) Board Camera | |
| Fabricantes | CIS Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DCC-SC01HD32 (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
DCC-SC01HD32
Rev.900-717-30-00
English
Color HD（720P）Board Camera
DCC-SC01HD32
Product Specification
& Operational Manual
CIS Corporation
©2010 CIS Corporation. All rights reserved.
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
DCC-SC01HD32
Rev.900-717-30-00
5. Specifications
5.1. General Specifications
(1) Pick up device
Device Type
1/3 type CMOS SONY IMX035LQR-C
Effective Pixel Numbers 1329(H) × 1049(V)
Unit Cell Size
3.63μm(H) ×3.63μm(V)
Chip Size
7.64mm(H) × 7.64mm(V)
(2) Resolutions
1280(H) × 720(V)
(3) Aspect Ratio
16 : 9
(4) Video output
60fps
Horizontal Frequency
45 kHz
frequency
Vertical Frequency
60 Hz
59.94fps
Horizontal Frequency
44.95 kHz
Vertical Frequency
59.94 Hz
50fps
Horizontal Frequency
37.50 kHz
Vertical Frequency
50 Hz
(5) Sync. system
Internal sync
(6) Video output standard Analog Component Output : Y/Pb/Pr 1Vp-p (3 Values, Sync signals) 75Ωterminal
RGB Output : RGB 1Vp-p (without SYNC ) 75Ω terminal
HD, VD TTL level (over 2.1V 1kΩ terminal)
(7) Horizontal resolution 600TV lines (contour correction SHARP)
(8) Sensitivity
F4.0 2000lx
(9) Minimum illumination 60fps,59.94fps : F2.5 6.0lx (with dedicated board camera lens)
F1.4 3.0lx (with F1.4 lens)
50fps : F2.5 5.0lx (with dedicated board camera lens)
F1.4 2.5lx (with F1.4 lens)
Conditions : VIDEO 50%, AGC 36dB, Electrical Shutter OFF
(10) Dust or stains
in optical systems
No dust or stain shall be detected on the testing screen with dedicated lens
installed, or with setting the camera aperture at F16 if there is no lens.
(11) Power requirements DC+9～+15V
(12) Power consumption 2.0W (Max. 2.4 W) at DC+12V IN
(13) Dimension
Refer to overall dimension drawing.
(14) Mass
Approx. 45g (including optional dedicated lens).
(15) Lens Mount
Dedicated board camera lens mouont. ※Refer to overall dimension drawing.
(16) Gain Setting
AGC (Max gain : +18dB, +24dB, +30dB, +36dB), AGC OFF(0dB)
MANUAL : 0dB～36dB
(17) Shutter Speed Variable OFF : 1/60(60fps, 59.94fps),1/50(50fps)
Range
(18) White Balance
Adjustment Range
FL : 1/100(60fps, 59.94fps), 1/120(50fps)
MANUAL : 1/10k, 1/4k, 1/2k, 1/1k, 1/500, 1/250, 1/120, 1/100, 1/60, 1/50, 1/30,
1/25, 1/15, 1/8, 1/4, 1/2, 1s, 2s, 4s, 8s
AUTO : 1/10ks～8s (Upper or lower limit can be set.)
ATW1 : 2200～9000K, ATW2 : 3200～6500K
Preset:3200K, 4800K, 6500K, Manual: 2200～9000K
(19) Electrical Zoom
×1～×4 PAN, TILT
(20) AUTO IRIS Signals
Responses are adjustable.
Usable with electrical shutter (with priority to electrical shutter).
©2010 CIS Corporation. All rights reserved.
4
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
DCC-SC01HD32
Rev.900-717-30-00
Main Menu
Items
GAIN
SHUTTER
WHITE_BAL
AESET
OPTION
EXIT
SELECT
OFF
AGC>
MANUAL>
OFF
FL
AES>
MANUAL>
ATW>
3200K
4800K
6500K
MWB>
LEVEL>
RESPONS>
BLC>
PICTURE>
EZOOM>
DISPLAY>
REMOTE>
SAVE>
CANSEL>
DEFAULT>
Next menu
→MAX
GAIN
→MANUAL
GAIN
→AES
SETTING
→MANUAL
SHUTTER
→ATW
SETTING
→MANUAL
WHITE BAL
→AE LEVEL
→AE
RESPONS
→BLC
SETTING
→PICTURE
→EZOOM
→DISPLAY
→REMOTE
SETTING
END
END
END
Explanation
Set AGC OFF to make Gain 0dB.
Set AGC ON.
[ENTER] to go to the next menu to enable to set the maximum Gain.
Set Gain manually.
[ENTER] to go to the next menu to enable to set the manual value.
Set the electronic shutter OFF.
The same shutter speed set as frame rate will be set.
Set to be flickerless.
When the set frame rate is 60fps, and 59.94fps, 1/100s shutter
speed will be set, while the set frame rate is 50fps, 1/120s shutter
speed will be set.
Operate Auto electronic shutter.
[ENTER] to go to the next menu to enable LOW SHUTT, LIM
(limitation of electronic high sensitivity), and HIGH SHUTT LIM
(limitation of high speed electronic shutter).
Set the electronic shutter manually.
[ENTER] to go to the next menu to enable to set the manual value.
Operate Auto White Balance.
[ENTER] to go to the next menu to enable to set tracking range,
tracking speed, and OFF SET of convergent point.
Fix white balance to 3200K.
Fix white balance to 4800K.
Fix white balance to 6500K.
Set White Balance manually.
[ENTER] to go to the next menu to enable to set the manual value.
[ENTER] to go to the next menu to enable to set the blightness of
auto exposure.
[ENTER] to go to the next menu to enable to set the operational
speeds of AGC, AES, and Auto Iris. Volume adjustment of Video
Iris can be checked as well.
[ENTER] to go to the next menu to enable to set back light setting.
[ENTER] to go to the next menu to enable to set the image
sharpness, gamma compensation, saturation, and defective pixel
correction of the image sensor.
[ENTER] to go to the next menu to enable to set electronic shutter.
[ENTER] to go to the next menu to enable to set the display settings
of title indication and electronic zoom magnifications.
[ENTER] to go to the next menu to enable to set the serial
communication speed.
Save the data set with OSD, and terminate the menu.
Restore the data set with OSD, and terminate the menu.
Restore the data to the initial settings, and terminate the menu.
©2010 CIS Corporation. All rights reserved.
10
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet DCC-SC01HD32.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DCC-SC01HD32 | Color HD(720p) Board Camera | CIS Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |