|
|
PDF LTD104EA5S Data sheet ( Hoja de datos )
| Número de pieza | LTD104EA5S | |
| Descripción | LCD Module | |
| Fabricantes | Toshiba | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTD104EA5S (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY
PRODUCTXINFORMATION
26cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LTD104EA5S
(p-Si TFT)
All information is subject to change without notice. Please read bottom
FEATURES
(1) 10.4XGA(1024x768 pixels) display size for notebook PC
(2) LVDS interface system
(3) Light weight and Thinner design
TENTATIVE
MECHANICAL SPECIFICATIONS
Item
Dimensional Outline (typ.)
Number of Pixels
Active Area
Pixel Pitch
Weight (approximately)
Backlight
*1 : Excepting the FL cable width
Specifications
237.7(W) x 173.2(H) x 4.9max(D) mm
1024(W) x 768(H) pixels
210.432(W) x 157.824(H) mm
0.2055(W) x 0.2055(H)
(195) g
Single CCFL, Sidelight type
ABSOLUTE MAXIMUM RATXINGS
Item
Supply Voltage (VDD)
(VFL)
FL Driving Frequency (fFL)
Input Signal Voltage (VIN)
Operating Temperature
Storage Temperature
Storage Humidity
Min. Max. Unit
-0.3 4.0
V
0 2.0 kV(rms)
- 100 kHz
-0.3 VDD+0.3
V
0 50 °C
-20 60 °C
10 90 %(RH)
ELECTRICAL SPECIFICATION
Item
Min.
Typ.
Max.
Unit
Remarks
Supply Voltage
(VDD)
3.0
3.3 3.6 V
FL Start Voltage (Ta=0°C)
Differential Input Voltage(High)
Differential Input Voltage(Center)
Differential Input Voltage(Low)
(VFL)
(VIH)
(VIS)
(VIL)
---
1200
(VIS)+0.1
0.5
---
(600)
---
---
1.2
---
---
---
---
1.5
(VIS)-0.1
V(rms)
V(rms)
V
V
V
IFL=5.0mA(rms)
Current Consumption
*2 (IDD)
--- 250 --- mA
*3 (IFL)
2.0
4.5 5.0 mA(rms)
*2 *3 Power Consumption
---
(3.7)
---
W IFL=5.0mA(rms)
*1 : Refer to “Timing Chart” and LVDS (THC63LVDF84A-85) specifications by THine Electronics, Inc. corporation.
*2 : 8 color bars pattern
*3 : Excepting the efficiency FL inverter
OPTICAL SPECIFICATION (Ta=25°C)
Item
Contrast Ratio (CR)
Response Time
(tON)
(tOFF)
Luminance (L)
Min.
100
---
---
140
Typ.
250
---
---
(180)
Max.
---
50
50
---
Unit
---
ms
ms
cd/m2
Remarks
IFL=5.0mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita
Display Technology before proceeding with the design of equipment incorporating this product.
(1/11)
2003-06-09 (Ver.1.5)
www.DataSheet4U.net
1 page  
www.DataSheet4U.net
TIMING CHART
(1) Vertical Timing
NCLK
DE
R7-R0
G7-G0
B7-B0
t1
t2
t4 t4 t3
X,1 X,2 X,3 X,4
X,Y
X,766 X,767 X,768
(2) Horizontal Timing
NCLK
t7
DE
R7-R0
G7-G0
B7-B0
1,Y2,Y 3,Y 4,Y
t4
t5
Xn,Y
(3) Vertical / Horizontal Sync Timing
VSYNC
HSYNC
DE
tvsu
tv‚†p
ta
767 768
tvw
tvhd
t6
1023,Y
1024,Y
tv
tvbp
th
tb
12
HSYNC
DE
thw
thfp
th
twde
Pixel Data
12345
thbp
1024
NCLK
LTD104EA5S
(5/11)
2003-06-09 (Ver.1.5)
www.DataSheet4U.net
5 Page 
www.DataSheet4U.net
LTD104EA5S
! FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions
detailed in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display Technology's Standard LCD Modules have not been customized for operation in extreme
environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba Matsushita Display Technology's Standard LCD Modules have not been designed for operation in extreme
environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which
exceed Toshiba Matsushita Display Technology's published specification limits.
C) In addition, since Toshiba Matsushita Display Technology Standard LCD Modules have not been designed for use in
applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft
navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military
defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear
energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba Matsushita Display Technology doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if
LCD panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATXINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may
be damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
7) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
(11/11)
2003-06-09 (Ver.1.5)
www.DataSheet4U.net
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LTD104EA5S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTD104EA5R | LCD Module | Toshiba |
| LTD104EA5S | LCD Module | Toshiba |
| LTD104EA5S1 | LCD Module | Toshiba |
| LTD104EA5W | Display Module | Toshiba |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |