|
|
Numéro de référence | KK74HC74A | ||
Description | Dual D Flip-Flop | ||
Fabricant | KODENSHI KOREA | ||
Logo | |||
TECHNICAL DATA
Dual D Flip-Flop with Set and Reset
KK74HC74A
The KK74HC74A is identical in pinout to the LS/ALS74. The device inputs
are compatible with standard CMOS outputs; with pullup resistors, they are
compatible with LS/ALSTTL outputs.
This device consists of two D flip-flops with individual Set, Reset, and
Clock inputs. Information at a D-input is transferred to the corresponding Q
output on the next positive going edge of the clock input. Both Q and Q
outputs are available from each flip-flop. The Set and Reset inputs are
asynchronous.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
KK74HC74AN Plastic
KK74HC74AD SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 14 =VCC
PIN 7 = GND
www.DataSheet4U.net
FUNCTION TABLE
Inputs
Outputs
Set Reset Clock Data Q Q
LH X XHL
HL X XLH
L L X X H* H*
HH
HHL
HH
LLH
H H L X No Change
H H H X No Change
HH
X No Change
*Both outputs will remain high as long as Set
and Reset are low, but the output states are
unpredictable if Set and Reset go high
simultaneously.
X = don’t care
1
|
|||
Pages | Pages 6 | ||
Télécharger | [ KK74HC74A ] |
No | Description détaillée | Fabricant |
KK74HC74A | Dual D Flip-Flop | KODENSHI KOREA |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |