DataSheetWiki


ID100 fiches techniques PDF

Micross - Dual PicoAmp Diodes

Numéro de référence ID100
Description Dual PicoAmp Diodes
Fabricant Micross 
Logo Micross 





1 Page

No Preview Available !





ID100 fiche technique
ID100
LOW LEAKAGE
PICO-AMP DUAL DIODE
Linear Systems replaces discontinued Intersil ID100
The ID100 is a low leakage Monolithic Dual Pico-Amp Diode
The ID100 low-leakage monolithic dual diode provides a
superior alternative to conventional diode technology
when reverse current (leakage) must be minimized. In
addition the monolithic dual construction allows
excellent capacitance matching per diode. The ID100
features a leakage current of 0.1 pA and is well suited
for use in applications such as input protection for
operational amplifiers.
FEATURES 
DIRECT REPLACEMENT FOR INTERSIL ID100 
REVERSE LEAKAGE CURRENT 
REVERSE BREAKDOWN VOLTAGE 
REVERSE CAPACITANCE 
ABSOLUTE MAXIMUM RATINGS (Note 1) 
@ 25°C (unless otherwise noted) 
IR = 0.1pA 
BVR ≥ 30V 
Crss = 0.75pF 
Maximum Temperatures 
ID100 Benefits:
Storage Temperature 
65°C to +200°C 
ƒ Negligible Circuit Leakage Contribution
ƒ Circuit “Transparent” Except to Shunt
High-Frequency Spikes
ƒ Simplicity of Operation
Operating Junction Temperature 
Maximum Power Dissipation 
Continuous Power Dissipation  
Maximum Currents
Forward Current  
55°C to +150°C 
300mW 
20mA 
ID100 Applications:
Reverse Current 
Maximum Voltages 
100µA 
ƒ Op Amp Input Protection
ƒ Multiplexer Overvoltage Protection
Reverse Voltage 
Diode to Diode Voltage 
30V 
±50V 
 
ID100 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted)
SYMBOL 
CHARACTERISTICS 
MIN.  TYP.  MAX. 
UNITS 
CONDITIONS 
BVR 
Reverse Breakdown Voltage  30  ‐‐ 
‐‐ 
V 
IR = 1µA 
VF 
Forward Voltage 
0.8  ‐‐ 
1.1 
V 
IF = 10mA 
IR 
|IR1IR2| 
ClickCrSS 
Reverse Leakage Current 
Differential Leakage Current 
Total Reverse Capacitance(Note 2) 
‐‐ 
‐‐ 
‐‐ 
‐‐ 
To Buy0.1 
2.0 
‐‐ 
0.75 
‐‐ 
10 
3 
1 
 
pA 
pF 
VR = 1V 
VR = 10V 
VR = 10V, f = 1MHz 
Note 1 - Absolute maximum ratings are limiting values above which ID100 serviceability may be impaired.
Note 2 - Design reference only, not 100% tested
FIGURE 1  Operational Amplifier Protection 
 
Input Differential Voltage limited to 0.8V (typ) by Diodes ID100 
D1 and D2. Common Mode Input voltage limited by Diodes ID100 
D3 and D4 to ±15V. 
FIGURE 2   Sample & Hold Circuit 
 
Typical Sample and Hold circuit with clipping. ID100 diodes 
reduce offset voltages fed capacitively from the ID100 switch 
gate.
TO-78 (Bottom View)
Micross Components Europe
Tel: +44 1603 788967
Web: http://www.micross.com/distribution
Available Packages:
ID100 in TO-78
ID100 available as bare die
Please contact Micross for
full package and die dimensions
Note pins 3 & 5 must not be connected, in 
any fashion or manner, to any circuit or node 
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.
Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: [email protected] Web: www.micross.com/distribution.aspx

PagesPages 1
Télécharger [ ID100 ]


Fiche technique recommandé

No Description détaillée Fabricant
ID100 SILICON CONTROLLED RECTIFIERS Digitron Semiconductors
Digitron Semiconductors
ID100 MONOLITHIC DUAL PICO AMPERE DIODES Linear Integrated Systems
Linear Integrated Systems
ID100 SCR Microsemi
Microsemi
ID100 Dual PicoAmp Diodes Micross
Micross

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche