DataSheetWiki


KWM-50881 fiches techniques PDF

Lucky Light Electronic - Dot Matrix LED Display

Numéro de référence KWM-50881
Description Dot Matrix LED Display
Fabricant Lucky Light Electronic 
Logo Lucky Light Electronic 





1 Page

No Preview Available !





KWM-50881 fiche technique
KWM-50881 SERIES
8 x 8 Dot Matrix (5.0mm Dot)
LED Display
DESCRIPTION:
The KWM-50881 series is 50.70mm (1.996") height 8 x 8 dot matrix display.
This series is suitable for use in single/multi-line message display, large area
graphics display and electronic games.
All devices are available as either common row anode or common row cathode.
ABSOLUTE MAXIMUM RATINGS: (Ta=25oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25oC per segment
0.4mA/ oC
Operating Temperature Range
-40oC To 85oC
Storage Temperature Range
-40oC To 100oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf V
If=20mA
Peak Emission Wave Length
λρ
nm
If=20mA
Spectral Line Half-Width
∆λ nm
If=20mA
Reverse Current
Ir µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
PACKAGE DIMENSIONS
PIN 1 6.35*7=44.45(1.75)
50.70(1.996)
COL 1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
φ5.0(0.197)
8
ROW
2.54*11=27.94(1.10)
9.30(0.366)
6.30(0.248)
φ0.50(0.020)
38.10(1.50)
INTERNAL CIRCUIT DIAGRAM
ROW CATHODE
ROW ANODE
COL 1 2 3 4 5 6 7 8
PIN
NO.
20
19 18
17
16
15
14
13
ROW
PIN
NO.
11
COL 1 2 3 4 5 6 7 8
PIN
NO.
20
19
18
17
16
15
14
13
ROW
PIN
NO.
11
22 22
33 33
44 44
5 21
5 21
6 22
6 22
7 23
7 23
8 24
8 24
5, 6, 7, 8, 9, 10, 11&12 NO CONNECT
5, 6, 7, 8, 9, 10, 11&12 NO CONNECT
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave Absolute Maximum Ratings Electro-optical Characteristic
C.C
or Length ∆λ Pd If If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Dot (Rec) Per Dot
λρ (nm) (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.
KWM-50881A5
GaP
Bright Red
700 90 100 50 100 1.7 2.4 2.8 10-20 450 950
KWM-50881A3 GaAsP/GaP
KWM-50881AS GaAlAs
KWM-50881A2
GaP
Hi-Eff Red
Super Red
Green
Common
Anode
635
660
565
45 100 50 100 1.7 1.9 2.6 10-20 900 1800
20 100 50 100 1.5 1.9 2.6 10-20 1600 3000
30 100 50 100 1.7 2.2 2.6 10-20 800 1700
KWM-50881AG GaP Super Green
KWM-50881A6 GaAsP/GaP Yellow
KWM-50881C5
GaP
Bright Red
570 30 100 50 100 1.7 2.2 2.6 10-20 850 1850
585 30 100 50 100 1.7 1.9 2.6 10-20 800 1700
700 90 100 50 100 1.7 2.4 2.8 10-20 450 950
KWM-50881C3 GaAsP/GaP Hi-Eff Red
KWM-50881CS GaAlAs Super Red Common
KWM-50881C2
GaP
Green Cathode
635
660
565
45 100 50 100 1.7 1.9 2.6 10-20 900 1800
20 100 50 100 1.5 1.9 2.6 10-20 1600 3000
30 100 50 100 1.7 2.2 2.6 10-20 800 1700
KWM-50881CG GaP Super Green
KWM-50881C6 GaAsP/GaP Yellow
570 30 100 50 100 1.7 2.2 2.6 10-20 850 1850
585 30 100 50 100 1.7 1.9 2.6 10-20 800 1700
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).

PagesPages 1
Télécharger [ KWM-50881 ]


Fiche technique recommandé

No Description détaillée Fabricant
KWM-50881 Dot Matrix LED Display Lucky Light Electronic
Lucky Light Electronic
KWM-50882 Dot Matrix LED Display Lucky Light Electronic
Lucky Light Electronic

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche