78M6613 Datasheet PDF - Teridian Semiconductor
| Part Number | 78M6613 | |
| Description | Single-Phase AC Power Measurement IC | |
| Manufacturers | Teridian Semiconductor | |
| Logo |  |
|
|
There is a preview and 78M6613 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
A Maxim Integrated Products Brand
DS_6613_018
DESCRIPTION
The 78M6613 is a highly integrated IC for simplified
implementation of single-phase AC power measurement
into power supplies, smart appliances, and ot her
applications with embedded AC load monitoring and
control. It is packaged in a small, 5mm x 5mm, 32-pin QFN
package for optimal space savings.
At the measurement interface, the device provides four
analog inputs for interfacing to voltage and current sensors.
Voltages from the sensors are fed to our Single Converter
Technology® that uses a 22-bit delta-sigma ADC,
independent 32-bit compute engine (CE), digital
temperature compensation, and precision voltage
references to provide better than 0.5% power measurement
accuracy over a wide 2000:1 dynamic range.
The integrated MPU core and 32 KB of flash memory
provides a flexible means of configuration, post-processing,
data formatting, and interfacing to any host processor
through the UART interface and/or DIO pins. Complete
application firmware is available and can be preloaded into
the IC during manufacturing test. Alternatively, a complete
array of ICE, development tools, and programming libraries
are available to allow customization for each application.
LIVE
NEUT
Earth Ground
Isolated Supply
www.DataSheet4U.net
32 kHz
CONVERTER
A0
A1
A2
A3
VOLTAGE REF
VREF
TEMP
SENSOR
OSC/PLL
XIN
XOUT
V3P3
TERIDIAN
78M6613
2KB RAM
32KB
FLASH
32-bit
COMPUTE
ENGINE
80515
MPU
TIMERS
GND
REGULATOR
DIO, PULSE
DIO 4-8
DIO 14-17, 19
SERIAL PORT
TX
RX
ICE
ICE_E
Single Converter Technology is a registered trademark of Maxim
Integrated Products, Inc.
V3P3
GND
19-5348; Rev 3/11
78M6613
Single-Phase
AC Power Measurement IC
DATA SHEET
March 2011
FEATURES
• < 0.5% Wh Accuracy Over Wide 2000:1
Current Range and Over Temperature
• Voltage Reference < 40ppm/°C
• Four Sensor Inputs—V3P3A Referenced
• 22-Bit Delta-Sigma ADC with Independent
32-Bit Compute Engine (CE)
• 8-Bit MPU (80515), One Clock Cycle per
Instruction with 2KB MPU XRAM
• 32KB Flash with Security
• Integrated In-Circuit Emulator (ICE) Interface
for MPU Debug
• 32kHz Time Base with Hardware Watchdog
Timer
• UART Interface and Up to 10 General-
Purpose 5V Tolerant I/O Pins
• Packaged in a RoHS-Compliant (6/6)
Lead(Pb)-Free, 32-Pin QFN (5mm x 5mm)
• Complete Application Firmware Provides:
o True RMS Calculations for Current,
Voltage, Line Frequency, Real Power,
Reactive Power, Apparent Power, and
Power Factor
o Accumulated Watt-Hours, Kilowatt-Hours
o Intelligent Switch Control at Zero
Crossings
o Digital Temperature Compensation
o Phase Compensation (±15°)
o Quick Calibration Routines
o 46–64Hz Line Frequency Range with
Same Calibration
Rev. 1.1
© 2011 Teridian Semiconductor Corporation
1
|
| |
 
DS_6613_018
78M6613 Data Sheet
1 Hardware Description
1.1 Hardware Overview
The Teridian 78M6613 single-chip measurement unit integrates all primary functional blocks required to
embed solid-state AC power and energy measurement. Included on chip are:
• An analog front end (AFE)
• An independent digital computation engine (CE)
• An 8051-compatible microprocessor (MPU) which executes one instruction per clock cycle (80515)
• A voltage reference
• A temperature sensor
• RAM and Flash memory
• A variety of I/O pins
Current sensor technologies supported include Current Transformers (CT) and Resistive Shunts.
In a typical application, the 32-bit compute engine (CE) of the 78M6613 sequentially processes the
samples from the voltage inputs on pins A0, A1, A2, A3 and performs calculations to measure active
energy (Wh), reactive energy (VARh), A2h, and V2h for four-quadrant measurement. These
measurements are then accessed by the MPU, processed further and output using the peripheral
interfaces available to the MPU.
In addition to the temperature-trimmed ultra-precision voltage reference, the on-chip digital temperature
compensation mechanism includes a temperature sensor and associated controls for correction of
unwanted temperature effects on measurement. Temperature dependent external components such as
crystal oscillator, current transformers (CTs), and their corresponding signal conditioning circuits can be
characterized and their correction factors can be programmed to produce measurements with
exceptional accuracy over the industrial temperature range, if desired.
A block diagram of the IC is shown in Figure 1. A detailed description of various functional blocks
follows.
www.DataSheet4U.net
Rev. 1.1
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 78M6613 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ 78M6613.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| 78M6610+PSU | The function is Energy Measurement Processor. Maxim Integrated |  |
| 78M6612 | The function is Dual-Outlet Power and Energy Measurement IC. TERIDIAN Semiconductor |  |
| 78M6613 | The function is Single-Phase AC Power Measurement IC. Teridian Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
78M6
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||