DataSheet39.com

What is TA8266HQ?

This electronic component, produced by the manufacturer "Toshiba", performs the same function as "Max Power 35 W BTL X 4 ch Audio Power IC".


TA8266HQ Datasheet PDF - Toshiba

Part Number TA8266HQ
Description Max Power 35 W BTL X 4 ch Audio Power IC
Manufacturers Toshiba 
Logo Toshiba Logo 


There is a preview and TA8266HQ download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! TA8266HQ datasheet, circuit

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8266HQ
TA8266HQ
Max Power 35 W BTL × 4 ch Audio Power IC
The TA8266HQ is 4 ch BTL audio power amplifier for car audio
application.
This IC can generate more high power: POUTMAX = 35 W as it
is included the pure complementary PNP and NPN transistor
output stage.
It is designed low distortion ratio for 4 ch BTL audio power
amplifier, built-in stand-by function, muting function, and
diagnosis circuit which can detect output to VCC/GND short and
over voltage input mode.
Additionally, the AUX amplifier and various kind of protector
for car audio use is built-in.
Weight: 7.7 g (typ.)
Features
High power : POUTMAX (1) = 35 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 )
: POUTMAX (2) = 31 W (typ.)
(VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 )
: POUT (1) = 23 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 )
: POUT (2) = 20 W (typ.)
(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 )
Built-in diagnosis circuit (pin 25)
Low distortion ratio: THD = 0.02% (typ.)
(VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 )
Low noise: VNO = 0.18 mVrms (typ.)
(VCC = 13.2 V, Rg = 0 , GV = 34dB, BW = 20 Hz~20 kHz)
Built-in stand-by switch function (pin 4)
www.DataSheet4U.net Built-in muting function (pin 22)
Built-in AUX amplifier from single input to 2 channels output (pin 16)
Built-in various protection circuit
: Thermal shut down, over voltage, out to GND, out to VCC, out to out short, speaker burned
Operating supply voltage: VCC (opr) = 9~18 V
Note 1: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the
product or equipment.
Note 2: These protection functions are intended to avoid some output short circuits or other abnormal conditions
temporarily. These protect functions do not warrant to prevent the IC from being damaged.
- In case of the product would be operated with exceeded guaranteed operating ranges, these
protection features may not operate and some output short circuits may result in the IC being
damaged.
1 2006-04-28

line_dark_gray
TA8266HQ equivalent
TA8266HQ
4. AUX Input (pin 16)
The pin 16 is for input terminal of AUX
amplifier.
The total gain is 0dB by using of AUX amplifier.
Therefore, the µ-COM can directly drive the
AUX amplifier.
BEEP sound or voice synthesizer signal can be
input to pin 16 directly.
When AUX function is not used, this pin must be
connected to PRE-GND (pin 13) via a capacitor.
20dB AMP.
IN
µ-COM
AUX-IN
16
AUX AMP
20dB
OUT (+)
OUT ()
Figure 6 AUX Input
5. Diagnosis Output (pin 25)
This diagnosis output terminal of pin 25 has open collector output structure on chip as shown in Figure 7.
In case diagnosis circuit that detect unusual case is operated, NPN transistor (Q1) is turned on.
It is possible to protect all the system of apparatus as well as power IC protection.
In case of being unused this function, use this IC as open-connection on pin 25.
5V
OUTPUT SHORT
PROTECTOR
OVER VOLTAGE
PROTECTOR
25
Q1
5V
GND
t
Q1 is turned on
pin 25: Open collector output (active low)
Figure 7 Self Diagnosis Output
www.DataSheet4U.net
5.1 In Case of Shorting Output to VCC/GND or Over Voltage Power Supplied
NPN transistor (Q1) is turned on.
Threshold of over voltage protection: VCC = 22 V (typ.)
5V
25 µ-COM
LED/LCD (Flashing)
ALARM (Announcement from a speaker.)
REGULATOR OFF (Relay OFF)
MEMORY (Count and record)
Figure 8 Application 1
5.2 In Case of Shorting Output to Output
NPN transistor (Q1) is turned on and off in response to the input signal voltage.
5 2006-04-28


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TA8266HQ electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ TA8266HQ.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
TA8266HThe function is Max Power 35 W BTL 4 ch Audio Power IC. Toshiba SemiconductorToshiba Semiconductor
TA8266HQThe function is Max Power 35 W BTL X 4 ch Audio Power IC. ToshibaToshiba

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

TA82     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search