|
|
Número de pieza | MAAM-007865-0P1R00 | |
Descripción | Broadband Driver Amplifier | |
Fabricantes | M/A-COM Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAAM-007865-0P1R00 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! MAAM-007865-0P1R00
Broadband Driver Amplifier
50 to 2000 MHz
Features
• High Gain: 20 dB (TYP.)
• Flat Broadband Gain Response: +/- 1.3 dB (TYP)
• P1dB: +18.0 dBm (TYP.)
• Flexibility for Multi-Band Systems
• On-Chip Active Bias Network
• Lead Free 3 mm PQFN Surface Mount Package
• 260oC Reflow Capability
Applications
• LO Buffer Amplifier
• Driver Stage for Power Amplifiers
• Basestation / Repeater Applications
• Broadband RF Gain Block
Product Image
Functional Block Diagram
Rev. V2
Description
M/A-COM’s MAAM-007865-0P1R00 amplifier utilizes GaAs HBT
technology with an +18 Volt BVceo process for improved linearity
performance, power efficiency, and high reliability, in a low cost
3 mm PQFN surface mount plastic package.
The MAAM-007865-0P1R00 incorporates an on-chip active bias
network for ease of implementation, and maintains high linearity
over temperature. The device operates from a single +5 volt
supply and has a +5 volt reference pin for power down
control capability. An external dropping resistor can be added to
lower the P1dB level by 4 dB.
Pin Configuration
Pin
No.
Function
Description
1 No Connection No connection
2
RF Input
RF Input Signal
3
RF Input
RF Input Signal
The MAAM-007865-0P1R00 requires a minimal number of
external bias components to achieve a flat gain response across
the entire 50 to 2000 MHz frequency band.
Ordering Information1
4 No Connection or GND No Connection. GND preferred
5 No Connection or GND No Connection. GND preferred
6 No Connection or GND No Connection. GND preferred
7 RF Output / VCC RF Output & VCC Supply Input
8 RF Output / VCC RF Output & VCC Supply Input
Part Number
MAAM-007865-0P1R00
www.DataSheet4U.com
MAAM-007865-0P1RA1
MAAM-007865-0P1RTR
Package
3 mm 12 lead PQFN
Sample Application Kit
1000 Piece Tape & Reel
9 No Connection No Connection
VCC Supply to Bias Circuit. Connected to
10
VCCB
VCONT on PCB. Optionally could be
connected to VCC instead of VCONT.
11
No Connection
Normally not connected or Open.
Must not be connected to GND.
DC Control Input to PA. External resistor
12
VCONT
required for normal operation @ +5 V.
See Application Circuit.
Pkg
Base
GND
RF/DC GND and thermal Path to PCB Vias.
Sufficient Vias must be provided for thermal
considerations. See PCB Layout
1. Reference Application Note M513 for reel size information.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
1 page MAAM-007865-0P1R00
Broadband Driver Amplifier
50 to 2000 MHz
EVALUATION CIRCUIT BOARD LAYOUT1,2,3
GND
Rev. V2
MAAM-007865-001
EVAL PCB1 4/06
RFIN
RFOUT
1. GETEK, 2-layer, Total Board Thickness = 32 mil.
Microstrip 50 Ohm Line width = 54 mil
Board Size: 1.4 x 1.1 inches.
2. Via Geometry shown must be used for the 3 mm PQFN package backside to provide a low-inductance & low
thermal resistance path to the PCB backside ground.
At least 9 vias are required. Via Diameter = 8 mils finished size with 1.0 mils minimum plating.
www.D3a.taSEhveaeltu4aUt.icoonmcircuit board assemblies use SnPb (tin lead) soldering process to attach all components, and are
therefore not RoHS compliant.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet MAAM-007865-0P1R00.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAAM-007865-0P1R00 | Broadband Driver Amplifier | M/A-COM Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |