DataSheet39.com

What is MAADSS0012?

This electronic component, produced by the manufacturer "M/A-COM Technology", performs the same function as "Digital Attenuator".


MAADSS0012 Datasheet PDF - M/A-COM Technology

Part Number MAADSS0012
Description Digital Attenuator
Manufacturers M/A-COM Technology 
Logo M/A-COM Technology Logo 


There is a preview and MAADSS0012 download ( pdf file ) link at the bottom of this page.





Total 5 Pages



Preview 1 page

No Preview Available ! MAADSS0012 datasheet, circuit

MAADSS0012
Digital Attenuator, 1-Bit, Single Control
21 dB, 0.8 - 8.0 GHz
Features
21 dB Step Attenuator
Positive Control: 2.5 V typical
Insertion Loss: 0.75 dB typical @ 2.0 GHz
Current Consumption: 40 µA typical
IP3: >42 dBm typical @ 2.0 GHz
Lead-Free 2mm 8-Lead PDFN Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Re-flow Compatible
Description
M/A-COM’s MAADSS0012 is a 1-bit, 21 dB step
attenuator. This GaAs MMIC digital attenuator is
packaged in an ultra small lead free 2 mm 8-Lead
PDFN surface mount package.
The MAADSS0012 digital attenuator will work with
any power source operating between 2.8 and 5.0
volts. This single bit attenuator is ideally suited for
use in wide band systems, up to 8.0 GHz where
good linearity and low insertion loss are required.
Typical applications for the MAADSS0012 attenuator
include WiMAX (802.16), Mesh Networks, Multi-
band repeaters and other linear systems.
Ordering Information 1,2
Part Number
Package
MAADSS0012TR-3000
3000 piece reel
MAADSS0012SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
www.DataSheet4U.com
Functional Schematic 3
Rev. V2
3. Blocking capacitors are required on all RF ports.
Pin Configuration
Pin No. Function
1 VC
2 Ground
3 RF In/Out
4 Ground
Pin No.
5
6
7
8
Function
Ground
RF In/Out
Ground
VDD
Absolute Maximum Ratings 4,5
Parameter
Input Power
0.8 - 8.0 GHz
VDD = 2.8 - 5.0 V
Control Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+33 dBm
-0.5 V < VC < 5.0 V
-40°C to +85°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.

line_dark_gray
MAADSS0012 equivalent
MAADSS0012
Digital Attenuator, 1-Bit, Single Control
21 dB, 0.8 - 8.0 GHz
Applications Section—Low Frequency Measurement
Insertion Loss
0.0
Relative Attenuation
-8.0
Rev. V2
-0.5 -11.5
-1.0
-1.5
+25°C
-40°C
+85°C
-15.0
-18.5
+25°C
-40°C
+85°C
-2.0
0.0
0.5 1.0 1.5
Frequency (GHz)
2.0
Input Return Loss—Insertion Loss State
-10
-15
+25°C
-40°C
+85°C
-20
-25
-30
0.0
0.5 1.0 1.5
Frequency (GHz)
2.0
-22.0
0.0
0.5 1.0 1.5
Frequency (GHz)
Input Return Loss—Attenuation State
0
-5
-10
+25°C
-40°C
+85°C
-15
-20
-25
-30
0.0
0.5 1.0 1.5
Frequency (GHz)
2.0
2.0
Output Return Loss—Insertion Loss State
-10
Output Return Loss—Attenuation State
0
-15
+25°C
-40°C
+85°C
-20
-5
+25°C
-10
-40°C
+85°C
-15
-20
-25
-25
-30
0.0 0.5 1.0 1.5
www.DataSheet4U.com Frequency (GHz)
2.0
-30
0.0
0.5 1.0 1.5
Frequency (GHz)
This data shows the MAADSS0012 with the board and connector loss removed.
2.0
M/A-COM recommends using DC-Blocking capacitors large enough that their Xc is insignificant at the frequency
of use. At 800 MHz a capacitor value greater than 1000 pF is recommended.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MAADSS0012 electronic component.


Information Total 5 Pages
Link URL [ Copy URL to Clipboard ]
Download [ MAADSS0012.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
MAADSS0010The function is Digital Attenuator. Tyco ElectronicsTyco Electronics
MAADSS0012The function is Digital Attenuator. M/A-COM TechnologyM/A-COM Technology
MAADSS0013The function is Digital Attenuator. M/A-COM TechnologyM/A-COM Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

MAAD     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search