|
|
PDF IDT74CBTLV6800 Data sheet ( Hoja de datos )
| Número de pieza | IDT74CBTLV6800 | |
| Descripción | LOW-VOLTAGE 10-BIT BUS SWITCH | |
| Fabricantes | Integrated Device Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IDT74CBTLV6800 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
IDT74CBTLV6800
LOW-VOLTAGE 10-BIT BUS SWITCH WITH PRECHARGED OUTPUTS
LOW-VOLTAGE 10-BIT
BUS SWITCH WITH
PRECHARGED OUTPUTS
INDUSTRIALTEMPERATURERANGE
IDT74CBTLV6800
FEATURES:
• Functionally equivalent to QS3800
• 5Ω A/B bi-directional switch
• Isolation under power-off conditions
• Over-voltage tolerant
• Latch-up performance exceeds 100mA
• VCC = 2.3V - 3.6V, Normal Range
• ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
• Available in QSOP and TSSOP packages
APPLICATIONS:
• 3.3V High Speed Bus Switching and Bus Isolation
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The CBTLV6800 provides 10-bits of high-speed bus switching with low
on-state resistance of the switch allowing connections to be made with
minimal propagation delay. The device also precharges the B port to a
user-selectable bias voltage (BIASV) to minimize live-insertion noise.
The CBTLV6800 is organized as a single 10-bit bus switch with a single
output-enable (OE) input. When OE is low, the 10-bit bus switch is on and
port A is connected to port B. When OE is high, the switch is open, and a
high impedance state exists between the two ports, and port B is precharged
to BIASV through the equivalent of a 10-kΩ resistor.
To ensure the high-impedance state during power up or power down,
OE should be tied to VCC through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking capability of the driver.
SIMPLIFIED SCHEMATIC, EACH SWITCH
2
A1
SW
11
A10
SW
OE 1
www.DataSheet4U.com
13 BIASV
23
B1
14
B10
A
B
OE
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
© 2006 Integrated Device Technology, Inc.
1
JUNE 2006
DSC-5739/4
1 page  
IDT74CBTLV6800
LOW-VOLTAGE 10-BIT BUS SWITCH WITH PRECHARGED OUTPUTS
ORDERING INFORMATION
IDT XX CBTLV XXX
XX
Temp. Range
Device Type Package
INDUSTRIALTEMPERATURERANGE
Q
QG
PG
PGG
Quarter-size Small Outline Package
QSOP - Green
Thin Shrink Small Outline Package
TSSOP - Green
6800 Low-Voltage 10-Bit Bus Switch with Precharged Outputs
74 –40°C to +85°C
www.DataSheet4U.com
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
5
for Tech Support:
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet IDT74CBTLV6800.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IDT74CBTLV6800 | LOW-VOLTAGE 10-BIT BUS SWITCH | Integrated Device Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |