|
|
PDF LTPA245 Data sheet ( Hoja de datos )
| Número de pieza | LTPA245 | |
| Descripción | Printer | |
| Fabricantes | Seiko Instruments | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTPA245 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
LTP Series
LTPLTPA245 PRINTER
LTPA245 is a new ”Easy-Paper-Operation”
thermal line dot printer which has been devel-
oped by Seiko Instruments especially to match
the specific requirements of ECR and EFT-POS
applications. As it can alternatively be driven
by battery, it perfectly suits the needs of a
large variety of handheld terminals, too.
Distinguished in terms of compact and light-
weight design – such as the instalment of the
release lever on top or front and the motor
underneath the frame – and a printing speed
of max. 90mm/sec @ 8.5V, LTPA245 is a
valuable addition to the portfolio of "Easy-
Paper-Operation" – mechanisms. Finally, only
one connector is needed to drive both motor
and head of the printer and thus incorporates
cost-saving and advantageous design-in
aspects.
LTPA245
www.DataSheet4U.com
• High resolution printing (8 dots/mm)
• High speed, low voltage printing (53.4mm/s
@ 5V, 77mm/s @ 7.2V, 90mm/s @ 8.5V)
• Compact and lightweight (41g):
Lever on top or front, motor underneath
• Battery operation of 4 to 6 cells Ni-MH /
Ni-Cd batteries or 2 cells of lithium-ion
batteries for hand-held applications
• Low 4.5V to 8.5V power supply operation
• Improved operability of paper installation
and head cleaning by release lever
operation
• Low noise thermal line dot printing
• Design to fit easily into the outer case
(reduced number of outer case parts)
Model
LTPA245A-384
Printing
Method
Number of dots/line
Resolution (mm)
Paper feed pitch (mm)
Width (mm)
Speed (mm/s)
Detection Head temperature
Out-of-Paper detection
Dimensions (WXDXH) mm1
Weight (g)2
Power Supply Operating voltage
Current consumption3
Service Life Pulse activation
Abrasion resistance
Operating temperature (°C)
Storage temperature (°C)
Paper
Width (mm)
Paper feed force
Paper hold force
Thickness
Thermal line dot printing
384 dots
8 dots
0.0625
48
53.4 @ 5.0V, 77 @7.2V, 90 @ 8.5V
By thermistor
By photo interrupter
69.2 x 28.3 x 31.7
41
Vdd line: 2.7V to 5.25V; Vp line: 4.5V to 8.5V
1,53A max.@5V, 2.2A [email protected], 2.6A [email protected]
100 million pulses or more (12,5% print ratio)
50 km or more
0 to +50
-25 to +70
58 0-1
0.49 N (50gf) or more
0.78 N (80gf) or more
65 µm
1 Excluding lever of lock arm and platen block
2 Including all parts
3 When the number of simultaneously activated dots in the head is specified as 64
Seiko Instruments GmbH
Siemensstraße 9
D-63263 Neu-Isenburg
Telephone: 49-6102-297-0
Facsimile: 49-6102-297222
Specifications subject to change without notice.
LTPA245A / 01.03
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet LTPA245.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTPA245 | Printer | Seiko Instruments |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |