|
|
Número de pieza | NH020 | |
Descripción | Power SIPs | |
Fabricantes | Lineage Power | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NH020 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! Data Sheet
October 14, 2009
RoHS Compliant
Applications
n Distributed Power Architectures
n Communication Equipment
n Computer Equipment
Options
n Tight Tolerance output
n -40 °C operation
NH020-Series Power SIPs:
5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
Features
n Compatible with RoHS EU Directive 200295/EC
n Compatible in Pb- free or SnPb reflow environment
n Nonisolated output
n High efficiency: 86% typical
n Small size and low profile:
63.5 mm x 5.6 mm x 14 mm
(2.5 in x 0.22 in x 0.55 in)
n Remote On/Off
n Output overcurrent protection
n Output voltage adjustment
n Overtemperature protection
n UL* 60950 Recognized, CSA† C22.2 No. 60950-00 Certi-
fied, and VDE‡ 0805 (IEC60950, 3rd edition) Licensed
n Meets FCC classA radiated limits
www.DataSheeDt4eUs.ccormiption
The NH020-Series Power SIPs are nonisolated dc-dc converters that operate over an input voltage range of 4.5 Vdc to 5.5
Vdc and provide a precisely regulated dc output. The SIPs have a maximum output current rating of 6 A at a typical full-load
efficiency of 86%. Standard features include remote on/off and output voltage adjustment.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
Document Name:
PDF Name:DS00-128EPS (Replaces DS00-127EPS)
1 page Data Sheet
October 14, 2009
NH020-Series Power SIPs:
5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
Characteristic Curves
The following figures provide typical characteristics curves (TA = 25 °C).
Figure 1. Typical Input Characteristics at 6 A output
current.
Figure 4. Typical Efficiency for NH020Y.
Figure 2. Typical Output Characteristics.
Figure 5. Typical Efficiency for NH020A0G.
www.DataSheet4U.com
Figure 3. Typical Efficiency for NH020M .
Lineage Power
Figure 6. Typical Efficiency for NH020F.
5
5 Page Data Sheet
October 14, 2009
Feature Descriptions (continued)
Output Voltage Set-Point Adjustment
(Trim) (continued)
NH020-Series Power SIPs:
5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
Figure 23. NH020M Rtrim-up Test Results.
Figure 24. NH020Y Rtrim-up Test Results.
Figure 26. NH020F Rtrim-up Test Results .
Overcurrent Protection
To provide protection in a fault condition, the unit is equipped
with internal overcurrent protection. The unit operates nor-
mally once the fault condition is removed.
The power module will supply up to 350% of rated current for
less than 1.25 seconds before it enters thermal shutdown.
Overtemperature Protection
To provide additional protection in a fault condition, the unit is
equipped with a nonlatched thermal shutdown circuit. The
shutdown circuit engages when Q1 or Q2 exceeds approxi-
mately 110 °C. The unit attempts to restart when Q1 or Q2
cool down and cycles on and off while the fault condition
exists. Recovery from shutdown is accomplished when the
cause of the overtemperature condition is removed.
www.DataSheet4U.com
Figure 25. NH020G Rtrim-up Test Results .
Lineage Power
11
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet NH020.PDF ] |
Número de pieza | Descripción | Fabricantes |
NH020 | Power SIPs | Lineage Power |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |