|
|
PDF FH28 Data sheet ( Hoja de datos )
| Número de pieza | FH28 | |
| Descripción | 0.5 mm Pitch 2.55 mm above the board Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FH28 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
0.5 mm Pitch, 2.55 mm above the board,
Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH28 Series
Secure actuator lock and retention
Hold in place by metal fittings
Actuator color: Dark brown
Hold in place by contacts
sOverview
Continuing market trends demand higher contact count
connectors while maintaining high electrical/mechanical
reliability, exact FPC/FFC positioning and durability.
sFeatures
1. Precise FFC/FPC positionining
Large angle of the actuator opening and built-in side guides in the
connector allow straight and exact insertion of the FPC / FFC.
2. Rotating actuator
Proven rotating actuator system allows easy ZIF connection,
confirming it with a definite tactile feel. The contact securely
holds the actuator in place, providing reliable normal force.
The unique contact configuration assures that the connector
will remain dimensionally stable over the device’s life.
3. Strong FFC / FPC retention force
Horizontal direction FFC / FPC retention force : Increased
200% (as compared with FH12 series)(30 pos.)
4. Accepts standard FPC/FFC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat cable (FFC) can be used.
5. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
6. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
www.DvSaattacanuSduhaemerdtp4Uirce.kec-olumppaacknadgpinlagcceomnetanitn. s 2,000 connectors.
7. Halogen-free *
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
8. Optional 500 piece reel packaging
Standard packaging is 2,000 pieces per reel; however, 500
piece reels are possible.
(Emboss reel external diameter is 330mm.)
FPC temporary hold protrusion
Support straight type FPC / FFC
2010.9
1
1 page  
FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sRecommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness: 0.15 mm.
H±0.1
J±0.1
H±0.1
J±0.1
0.5±0.05
A±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
Standard type(FH28, FH28D)
sRecommended FPC/FFC dimensions
0.5±0.05
A±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
Space saving type(FH28H)
R0.2MAX
R0.2
0.5±0.1
0.5±0.05
A±0.05
F±0.07
G±0.1
0.3±0.03
0.5±0.1
1
0.3±0.05
Notes
1 Straight type FPC / FFC does not have the side-protruding retention tabs (cross-hatched areas).
2 W dimension should be 3.5mm min.
Part Number
FH28-10S-0.5SH(**)
FH28-15S-0.5SH(**)
FH28D-20S-0.5SH(**)
FH28D-28S-0.5SH(**)
FH28D-30S-0.5SH(**)
FH28-40S-0.5SH(**)
wwwF.HD2a8ta-S4h5eSe-t04.U5S.cHom(**)
FH28D-50S-0.5SH(**)
FH28D-55S-0.5SH(**)
FH28-60S-0.5SH(**)
FH28D-64S-0.5SH(**)
FH28D-68S-0.5SH(**)
FH28D-74S-0.5SH(**)
FH28H-80S-0.5SH(**)
CL No.
CL586-1861-4-**
CL586-1868-3-**
CL586-1823-5-**
CL586-1835-4-**
CL586-1827-6-**
CL586-1803-8-**
CL586-1848-6-**
CL586-1808-1-**
CL586-1821-0-**
CL586-1811-6-**
CL586-1813-1-**
CL586-1819-8-**
CL586-1828-9-**
CL586-1805-3-**
Number of contacts
10
15
20
28
30
40
45
50
55
60
64
68
74
80
F
5.5
8
10.5
14.5
15.5
20.5
23
25.5
28.0
30.5
32.5
34.5
37.5
40.5
G
7.1
9.6
12.1
16.1
17.1
22.1
24.6
27.1
29.6
32.1
34.1
36.1
39.1
42.1
Unit: mm
HJ
10.6 7
13.1 9.5
15.6 12.0
19.6 16.0
20.6 17.0
25.6 22.0
28.1 24.5
30.6 27.0
33.1 29.5
35.6 32.0
37.6 34.0
39.6 36.0
42.6 39.0
46.7 42.0
5
5 Page 
FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sPrecautions (mating/un-mating FPC with the retention tabs)
Operation
Precautions
1.How to insert
Insert the cable into the interspace between the
mold walls ( ) at both ends of entrance where
the connector is inserted and the guide walls ( )
at both ends of interior connector so the cable tabs
are properly located.
2 Avoid “ride on”
Avoid insertion so the cables ride on any guide. Be
sure NOT to close the actuator as the cables ride
on any guide. It may cause conduction failure.
Ride on a left guide
Ride on a right guide
2.Precautions when mating /un-mating
1 Avoid insertion in diagonal direction.
Do not insert the cable in diagonal direction.
A part of the connector may touches the contacts
resulting in deformation of the contacts.
Correct insertion
Do not close the actuator
as the cables ride on.
Insert the cable straight into the connector and
hook the cable tabs with the guide.
After insertion, slightly pull the cables to make sure
the cable tabs are firmly secured. No removal of the
cable means correct insertion.
1 Insert the cable
straight and obliquely
from above.
www.DataShee2t4SUli.gchotmly pull the cable
to make sure the tabs
are firmly secured.
In the event it is locked as the cables ride on a
guide, absolutely avoid moving the cable. In this
case, open the actuator and re-insert the cable as
instructed in “1.How to insert”.
Do not move the cables back and forth and around as the
cables ride on the guide when the actuator is closed.
3
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet FH28.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FH201 | VCO OSC Circuit Applications |  Sanyo Semicon Device |
| FH202 | VCO OSC Circuit Applications | Sanyo Semicon Device |
| FH203 | VCO OSC Circuit Applications | Sanyo Semicon Device |
| FH21-05S-1DS | 1mm Pitch FPC/FFC Connector | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |