|
|
Número de pieza | NCP1579 | |
Descripción | Low Voltage Synchronous Buck Controller | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NCP1579 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! NCP1579
Low Voltage Synchronous
Buck Controller
The NCP1579 is a low cost PWM controller designed to operate
from a 5 V or 12 V supply. This device is capable of producing an
output voltage as low as 0.8 V. This 8−pin device provides an optimal
level of integration to reduce size and cost of the power supply. The
NCP1579 provides a 1 A gate driver design and an internally set
275 kHz oscillator. In addition to the 1 A gate drive capability, other
efficiency enhancing features of the gate driver include adaptive
non−overlap circuitry. The device also incorporates an externally
compensated error amplifier and a capacitor programmable soft−start
function. Protection features include programmable short circuit
protection and undervoltage lockout (UVLO). The NCP1579 comes in
an 8−pin SOIC package.
Features
• Input Voltage Range from 4.5 to 13.2 V
• 275 kHz Internal Oscillator
• Boost Pin Operates to 30 V
• Voltage Mode PWM Control
• 0.8 V ±2.0 % Internal Reference Voltage
• Adjustable Output Voltage
• Capacitor Programmable Soft−Start
• Internal 1 A Gate Drivers
• 80% Max Duty Cycle
• Input Under Voltage Lockout
• Programmable Current Limit
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• STB
• Blue−Ray DVD
• LCD_TV
• DSP & FPGA Power Supply
• DC−DC Regulator Modules
http://onsemi.com
8
1
MARKING DIAGRAM
8
SOIC−8
D SUFFIX
CASE 751
1579
ALYW
G
1
1579 = Specific Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Device
PIN CONNECTIONS
BST 1
TG 2
GND 3
BG 4
8 PHASE
7 COMP/DIS
6 FB
5 VCC
(Top View)
ORDERING INFORMATION
Device
Package
Shipping†
NCP1579DR2G SOIC−8 2500/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
April, 2013 − Rev. 3
1
Publication Order Number:
NCP1579/D
1 page NCP1579
TYPICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
5.0 203
4.7 202
4.4 201
4.1 200 VCC = 12 V
3.8 199 VCC = 5 V
3.5
0
14
10 20 30 40 50 60
TJ, JUNCTION TEMPERATURE (°C)
Figure 3. ICC vs. Temperature
70
198
0
375
10 20 30 40 50 60
TJ, JUNCTION TEMPERATURE (°C)
Figure 4. Oscillator Frequency (FSW) vs.
Temperature
70
13 365
12
355
11
345
10
9 335
8
0 10 20 30 40 50 60
TJ, JUNCTION TEMPERATURE (°C)
Figure 5. Soft Start Sourcing Current vs.
Temperature
70
325
0
10 20 30 40 50 60
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. SCP Threshold vs. Temperature
70
808
806
804
802
800
798
796
794
792
0
10 20 30 40 50 60
TJ, JUNCTION TEMPERATURE (°C)
Figure 7. Reference Voltage (Vref) vs.
Temperature
70
http://onsemi.com
5
5 Page NCP1579
PACKAGE DIMENSIONS
−X−
A
SOIC−8
D SUFFIX
CASE 751−07
ISSUE AK
B
−Y−
−Z−
H
85
S 0.25 (0.010) M Y M
1
4
K
G
D
C
SEATING
PLANE
N X 45_
0.10 (0.004)
M
J
0.25 (0.010) M Z Y S X S
SOLDERING FOOTPRINT*
1.52
0.060
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
A 4.80 5.00 0.189 0.197
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.053 0.069
D 0.33 0.51 0.013 0.020
G 1.27 BSC 0.050 BSC
H 0.10 0.25 0.004 0.010
J 0.19 0.25 0.007 0.010
K 0.40 1.27 0.016 0.050
M 0_ 8_ 0_ 8_
N 0.25 0.50 0.010 0.020
S 5.80 6.20 0.228 0.244
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
ǒ ǓSCALE 6:1
mm
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
11
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCP1579/D
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet NCP1579.PDF ] |
Número de pieza | Descripción | Fabricantes |
NCP1570 | Low Voltage Synchronous Buck Controller | ON Semiconductor |
NCP1571 | Low Voltage Synchronous Buck Controller | ON Semiconductor |
NCP1573 | Low Voltage Synchronous Buck Controller | ON Semiconductor |
NCP1575 | Low Voltage Synchronous Buck Controller | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |