|
|
PDF M22520-2-01 Data sheet ( Hoja de datos )
| Número de pieza | M22520-2-01 | |
| Descripción | DATAMATE HAND CRIMP TOOL | |
| Fabricantes | HARWIN | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de M22520-2-01 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
1 page  
5. Squeeze the handles of the crimp tool fully together, until the ratchet releases.
The handle will return to the open position. Remove the crimped socket and wire.
Using the sight hole on the side wall of the socket, ensure that adequate insertion
of strands into the crimp socket has been achieved.
6. Crimp joints should be checked for:
a) Correct combination of cable, tool setting and crimp termination.
b) Correctness of form and location of crimp.
c) Freedom of fracture, rough edges and flash.
d) Adequate insertion of all conductor strands in the crimp barrel.
e) Absence of damage to the conductor or the insulation.
ASSEMBLY PROCEDURE
M80-XXX piece parts are assembled using the Assembly Tool T5748-19. See
Instruction Sheet IS-02 for details on assembly.
K36XX piece parts are assembled using the Assembly Tool ZK3610-00. See
Instruction Sheet IS-22 for details on assembly.
CARE OF TOOL
There is virtually no maintenance required for the M22520/2-01 tool. However, it is
good practice to keep the indenter tips free of residual colour band deposits and other
debris. A small wire brush may be used for this purpose.
We strongly recommend that you:
1. DO NOT immerse tools in any cleaning solution.
2. DO NOT spray oil into tool to lubricate.
www3.D.ataShDeeOt4UN.coOmT attempt to disassemble tool or make repairs.
This is a precision crimp tool and should be handled as such.
Side 4
IS-01 Issue: 2 Date: 06.09.00 C/Note: 5393
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet M22520-2-01.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| M22520-2-01 | DATAMATE HAND CRIMP TOOL | HARWIN |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |