DataSheetWiki


P2781 fiches techniques PDF

PulseCore Semiconductor - General Purpose EMI Reduction IC

Numéro de référence P2781
Description General Purpose EMI Reduction IC
Fabricant PulseCore Semiconductor 
Logo PulseCore Semiconductor 





1 Page

No Preview Available !





P2781 fiche technique
October 2006
rev 1.6
P2781/82/84
General Purpose EMI Reduction IC
Features
Provides up to 15dB of EMI suppression
FCC approved method of EMI attenuation
Generates a 1X, 2X, and 4X low EMI spread
spectrum clock of the input frequency
Input frequency range from 3 to 78MHz
External loop filter for spread % adjustment
Spreading ranges from ±0.25% to ±5.0%
Ultra low cycle-to-cycle jitter
Zero-cycle slip
3.3V operating voltage range
Ultra-low power CMOS design
P278xA is available in 8 pin SOIC and TSSOP
Packages
Available for industrial and automotive
temperature ranges.
reduces electromagnetic interference (EMI) at the clock
source, which provides system wide reduction of EMI of
all clock dependent signals. The P278xA allows
significant system cost savings by reducing the number of
circuit board layers and shielding that are traditionally
required to pass EMI regulations.
The P278xA uses the most efficient and optimized
modulation profile approved by the FCC. The P278xA
modulates the output of a single PLL in order to “spread”
the bandwidth of a synthesized clock and, more
importantly, decreases the peak amplitudes of its
harmonics. This result in significantly lower system EMI
compared to the typical narrow band signal produced by
oscillators and most frequency generators. Lowering EMI
by increasing a signal’s bandwidth is called spread
spectrum clock generation.
Product Description
Applications
The P278xA is a versatile spread spectrum frequency
modulator designed specifically for digital camera and
other digital video and imaging applications. The P278xA
The P278xA is targeted towards MFP, xDSL, fax modem,
set-top box, USB controller, DSC, and embedded systems.
Block Diagram
FS0 FS1 LF
VDD
XIN /CLKIN
XOUT
Crystal
Oscillator
www.DataSheet4U.com
Frequency
Divider
Feedback
Divider
Modulation
PLL
Phase
Detector
VCO
Output
Divider
ModOUT
VSS
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 Tel: 408-879-9077 Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.

PagesPages 11
Télécharger [ P2781 ]


Fiche technique recommandé

No Description détaillée Fabricant
P2781 General Purpose EMI Reduction IC Alliance Semiconductor
Alliance Semiconductor
P2781 MICROPROFILE LINE MATCHING TRANSFORMER ETAL
ETAL
P2781 General Purpose EMI Reduction IC PulseCore Semiconductor
PulseCore Semiconductor
P2781 General Purpose EMI Reduction IC ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche