|
|
Número de pieza | HMC813 | |
Descripción | SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC813 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! HMC813
v00.1210
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 -w2w6w.GDaHtaSzheet4U.com
Typical Applications
The HMC813 is ideal for:
• EW, ELINT & IFM Receivers
• DF Radar Systems
• ECM Systems
• Broadband Test & Measurement
• Power Measurement & Control Circuits
• Military & Space Applications
5
Functional Diagram
Features
High Logging Range: 55 dB
Frequency Flatness: ±1.5 dB
Saturated Output Power: -7 dBm
Fast Rise/Fall Times: 4/10 ns
Single Positive Supply: +3.3V
ESD Sensitivity (HBM): Class 1A
-55 to +85° C Operating Temperature
General Description
The HMC813 is a Successive Detection Log Video
Amplifier (SDLVA) with a limited RF output which
operates from 1 to 26 GHz. The HMC813 provides a
logging range of 55 dB. This device offers typical fast
rise/fall times of 4/10 ns. The HMC813 log video output
slope is typically 14.5 mV/dB. Maximum recovery times
are less than 20 ns. Ideal for high speed channelized
receiver applications, the HMC813 operates from a
single +3.3 V supply, and consumes only 150 mA. All
data shown herein is measured with the chip in a 50
Ohm environment and contacted with RF probes.
5-1
Electrical Specifications, TA = +25 °C, Vcc1 = Vcc2 = Vcc3 = Vcc4 = 3.3V [1]
Parameter
Input Frequency Range
Frequency Flatness (Video out)
Log Linearity
Log Linearity over Temperature
Minimum Logging Range
Maximum Logging Range
Saturated Output Power, Psat
Saturated Output Power Flatness
RF Input Return Loss
RF Output Return Loss
Log Video Minimum Output Voltage
Log Video Maximum Output Voltage
Log Video Output Rise Time
Log Video Output Fall Time
Conditions
Pin = -25 dBm
Pin = -40 dBm to +0 dBm
-55 to +85° C, Pin = -20 dBm
to ±3 dB error @ 18 GHz
to ±3 dB error @ 18 GHz
Pin = 0 dBm, 10% to 90%
Pin = 0 dBm, 90% to 10%
Typ.
1 - 26
±1.5
±1
±0.5
-53
6
-7
±2.5
7
13
0.875
1.65
4
10
[1] Electrical specs and performance plots are given for single-ended operation
Units
GHz
dB
dB
dB
dBm
dBm
dBm
dB
dB
dB
V
V
ns
ns
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
1 page HMC813
v00.1210
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA)
WITH LIMITED RF OUTPUT, 1 -w2w6w.GDaHtaSzheet4U.com
5
Absolute Maximum Ratings
Vcc1, Vcc2, Vcc3, Vcc4
ENBL
RF Input Power
Channel Temperature
Continuous Pdiss (T=85°C)
Derate 12.63 mW/°C above 85°C
Thermal Resistance
(Channel to die bottom)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+3.6V
+3.6V
+15 dBm
125 °C
0.51 W
79.20 °C/W
-65 to +150 °C
-55 to +85 °C
Class 1A
Outline Drawing
Die Packaging Information [1]
Standard
Alternate
WP-3 (Waffle Pack)
[2]
[1] Refer to the “Packaging Information” section for die
packaging dimensions.
[2] For alternate packaging information contact Hittite
Microwave Corporation.
NOTES:
1. ALL DIMENSIONS IN INCHES [MILLIMETERS]
2. DIE THICKNESS IS 0.011 [0.28]
3. TYPICAL BOND PAD IS 0.0024 SQUARE
4. BOND PAD METALLIZATION: ALUMINUM
5. NO BACKSIDE METAL
6. NO CONNECTION REQUIRED FOR UNLABELED BOND PADS
7. OVERALL DIE SIZE IS ±.002
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
5-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet HMC813.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC8100LP6JE | Intermediate Frequency Receiver | Analog Devices |
HMC8118 | E-Band I/Q Upconverter | Analog Devices |
HMC8119 | E-Band I/Q Upconverter | Analog Devices |
HMC8120 | E-Band Variable Gain Amplifier | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |