DataSheetWiki


MAX12000 fiches techniques PDF

Maxim Integrated Products - 1575MHz GPS Front-End Amplifier

Numéro de référence MAX12000
Description 1575MHz GPS Front-End Amplifier
Fabricant Maxim Integrated Products 
Logo Maxim Integrated Products 





1 Page

No Preview Available !





MAX12000 fiche technique
19-4021; Rev 0; 3/06
EVAALVUAAILTAIOBNLEKIT
1575MHz GPS Front-End Amplifierwww.DataSheet4U.com
General Description
The MAX12000 GPS front-end amplifier IC is designed
for automotive and marine GPS satellite navigation
antenna modules or for any application that needs to
compensate for cable losses from the GPS antenna to
receiver. Two unconditionally stable low-noise amplifier
stages provide the high gain and integrated I/O match-
ing to minimize the need for external matching compo-
nents and eliminate the need for additional gain stages.
The MAX12000 features the option to place a bandpass
ceramic or SAW filter between the two amplifier stages
to provide a narrow-band output to further improve the
noise performance of the GPS receiver. Additionally, a
3.4dB gain step is provided to compensate for cable
loss variation between different applications.
The MAX12000 is designed to operate at the GPS fre-
quency of 1575MHz with a 34.8dB typical cascaded
gain and a 25mA supply current. The two LNA stages
allow the use of a wide range of GPS filter types for
maximum flexibility in system design. The final RF out-
put pin, which drives the cable to the GPS receiver, is
also the power-supply connection that accepts a DC
supply in the +3.0V to +5.5V range. Alternatively, the
DC supply can be applied to pin 4.
The GPS front-end amplifier is designed on a low-noise,
advanced SiGe process and is available in a lead-free,
10-pin TDFN surface-mount package (3mm x 3mm).
Applications
Integrated Automotive and Marine GPS
Receivers
Features
First Amp Noise Figure*: 1.0dB
High Gain**: 34.8dB
3.4dB Gain Step
Integrated 50Output Matching
3.0V to 5.5V Supply Voltage Range
Small, Low-Cost Package (3mm x 3mm)
ESD Protected to ±1kV Human Body Model
*Without external input impedance match.
**First amplifier input is impedance matched (S11 = -10dB).
Second amplifier set to high gain. Amplifiers cascaded without
interstage filter.
Ordering Information
PART
TEMP RANGE
MAX12000ETB+ -40°C to +85°C
+Denotes lead-free package.
PIN-
PACKAGE
10 TDFN
PKG
CODE
T1033-2
Typical Operating Circuit appears at end of data sheet.
Pin Configuration/Functional Diagram
TOP VIEW
+
RFIN2 1
GND 2
GND 3
EXTCAP/ALT_VCC 4
RFOUT2/VCC 5
MAX12000
AMP 2
AMP 1
DC
GENERATION
10 RFOUT1
9 GND
8 GND
7 GAIN_SELECT
6 RFIN1
TDFN
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 9
Télécharger [ MAX12000 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1200 +5v sINGLE-sUPPLY / 1mSPS / 16-bIT sELF-cALIBRATING adc Maxim Integrated
Maxim Integrated
MAX12000 1575MHz GPS Front-End Amplifier Maxim Integrated Products
Maxim Integrated Products
MAX12005 8 x 4 Satellite IF Switch Matrix Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche