|
|
Número de pieza | LA42032 | |
Descripción | 5W X 2ch Power Amplifier | |
Fabricantes | Sanyo Semicon Device | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LA42032 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! Ordering number : ENA0855
LA42032
Monolithic Linear IC
Audio Output for TV application
5W × 2ch Power Amplifier
Overview
LA42032 is 5W 2-channel AF power amplifier intended for televisions.
Functions
• 3W × 2 channels (VCC = 9V, RL = 8Ω, THD = 10%).
• 5W × 2 channels (VCC = 11V, RL = 8Ω, THD = 10%).
• Standby function.
• Built-in mute function.
• Built-in various protection circuit (short to VCC/short to groumd/load shorting/overheating).
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Maximum junction temperature
Thermal resistance
Operating temperature
Storage temperature
Symbol
VCC max
Pd max
Tj max
θjc
Topr
Tstg
Conditions
Infinitely large heat sink
Ratings
16
15
150
3
-25 to +75
-40 to +150
Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Recommended load resistance
Allowable operating supply
voltage range
Symbol
VCC
RL
VCC op
Conditions
Under conditions such that
Maximum ratings are not exceeded
Ratings
9
8
5.5 to 15
Unit
V
W
°C
°C/W
°C
°C
Unit
V
Ω
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
DataSheet4U
62007 MS PC 20060203-S00001 No.A0855-1/7
1 page Cautions for us
LA42032
1. Short-circuit (power-output short-circuit), ground fault (GND-output short-circuit), and load short-circuit protective
circuits are incorporated. They are activated in case of abnormal connection.
These circuits remain active while such abnormal connection continues and is reset automatically when the
abnormality is removed.
In certain conditions, the protective circuits may be locked and continue to be active even when the abnormality is
removed. In this case, either enter the standby mode or turn OFF the power supply.
2. The thermal protection circuit is incorporated and is activated when the junction temperature (Tj) rises to about 160°C
or more. The output is controlled to return gradually to the attenuated state.
3. When the product is used near the maximum rating, even the slightest change in the condition may cause
exceeding of the maximum rating, resulting possibly in breakdown. Take the sufficient margin for the supply voltage, etc.
and always use the product within a range never exceeding the maximum rating.
DataSheet4U
No.A0855-5/7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet LA42032.PDF ] |
Número de pieza | Descripción | Fabricantes |
LA42031 | 5W Monaural Power Amplifier | Sanyo Semicon Device |
LA42032 | 5W X 2ch Power Amplifier | Sanyo Semicon Device |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |