|
|
Número de pieza | LM1815EP | |
Descripción | Enhanced Plastic Adaptive Variable Reluctance Sensor Amplifier | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LM1815EP (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! LM1815EP
OBSOLETE
July 23, 2010
Enhanced Plastic Adaptive Variable Reluctance Sensor
Amplifier
General Description
The LM1815EP is an adaptive sense amplifier and default
gating circuit for motor control applications. The sense am-
plifier provides a one-shot pulse output whose leading edge
coincides with the negative-going zero crossing of a ground
referenced input signal such as from a variable reluctance
magnetic pick-up coil.
In normal operation, this timing reference signal is processed
(delayed) externally and returned to the LM1815EP. A Logic
input is then able to select either the timing reference or the
processed signal for transmission to the output driver stage.
The adaptive sense amplifier operates with a positive-going
threshold which is derived by peak detecting the incoming
signal and dividing this down. Thus the input hysteresis varies
with input signal amplitude. This enables the circuit to sense
in situations where the high speed noise is greater than the
low speed signal amplitude. Minimum input signal is
150mVP-P.
ENHANCED PLASTIC
• Extended Temperature Performance of −40°C to +125°C
• Baseline Control - Single Fab & Assembly Site
• Process Change Notification (PCN)
• Qualification & Reliability Data
• Solder (PbSn) Lead Finish is standard
• Enhanced Diminishing Manufacturing Sources (DMS)
Support
Features
■ Adaptive hysteresis
■ Single supply operation
■ Ground referenced input
■ True zero crossing timing reference
■ Operates from 2V to 12V supply voltage
■ Handles inputs from 100 mVP-P to over 120VP-P with
external resistor
■ CMOS compatible logic
Applications
■ Selected Military Applications
■ Selected Avionics Applications
Ordering Information
PART NUMBER
LM1815MXEP
(Note 1, Note 2)
VID PART NUMBER
V62/04634-01
TBD
NS PACKAGE NUMBER (Note 3)
M14A
TBD
Note 1: For the following (Enhanced Plastic) versions, check for availability: LM1815MEP, LM1815NEP. Parts listed with an "X" are provided in
Tape & Reel and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
© 2010 National Semiconductor Corporation 200905
www.DataSheet.in
200905 Version 2 Revision 1 Print Date/Time: 2010/07/23 13:58:32
www.national.com
1 page Mode 2 Minimum Arming Threshold
vs VCC
Pin 3 VIN
vs VSIGNAL
Pin 3 VIN
vs VSIGNAL, RIN = 10kΩ
20090509
Pin 3 VIN
vs VSIGNAL, RIN = 20kΩ
20090510
Pin 3 VIN
vs VSIGNAL, RIN = 50kΩ
20090511
Pin 3 Bias Current
vs Temperature
20090512
www.DataSheet.in
20090513
5
200905 Version 2 Revision 1 Print Date/Time: 2010/07/23 13:58:32
20090514
www.national.com
5 Page Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Circuit (M)
NS Package Number M14A
www.DataSheet.in
Molded Dual-In-Line Package (N)
NS Package Number N14A
11
200905 Version 2 Revision 1 Print Date/Time: 2010/07/23 13:58:32
www.national.com
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet LM1815EP.PDF ] |
Número de pieza | Descripción | Fabricantes |
LM1815EP | LM1815EP Enhanced Plastic Adaptive Variable Reluctance Sensor Amplifier (Rev. B) | Texas Instruments |
LM1815EP | Enhanced Plastic Adaptive Variable Reluctance Sensor Amplifier | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |