|
|
Número de pieza | NGC-30-Cxx | |
Descripción | Control and monitoring modules | |
Fabricantes | Tyco Thermal Controls | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NGC-30-Cxx (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! DRAFT
NELSON
Job N° 075236
Date: 28/04/08
NGC-30-CR
NGC-30-CRM
NGC-30-CRMS
NGC-30-CTM
NGC-30-CVM
Document Install-113
www.DataSheet.in
Installation Instructions
Montageanleitung
Instructions d’installation
1 page Optional Voltage Sensor
The optional voltage sensor
can monitor 80 – 290 Vac. This
voltage connects to one of the
five line current/ground-fault
inputs on the NGC-30-CRM.
Note: By using the optional
voltage sensor, you lose the
ability to monitor the ground-fault
and current for that circuit.
Cable Preparation
Notes:
1. Cut one end off of a ground-
fault /line current cable.
2. Strip insulation approx.
2,5 cm from cut end.
3. Strip the red and black wire
insulation approx. 0,5 cm.
4. Connect red and black wire to the two position terminal plug.
No need to be concerned about polarity.
5. wTrim brown and orange wires from cut end.
Mounting of NGC-30-CTM
Each NGC-30-CTM mounts on a DIN 35 rail. It should be located
between the circuit breaker or terminal block and contactor or SSR in
the panel.
NGC-30-CTM Installation Instructions
www.DataSheet.in
DigiTrace NGC-30 INSTALLATION INSTRUCTIONS
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet NGC-30-Cxx.PDF ] |
Número de pieza | Descripción | Fabricantes |
NGC-30-Cxx | Control and monitoring modules | Tyco Thermal Controls |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |