DataSheetWiki


EL5111T fiches techniques PDF

Intersil Corporation - 60MHz Rail-to-Rail Input-Output Operational Amplifier

Numéro de référence EL5111T
Description 60MHz Rail-to-Rail Input-Output Operational Amplifier
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





EL5111T fiche technique
60MHz Rail-to-Rail Input-Output Operational Amplifier
EL5111T
The EL5111T is a high voltage rail-to-rail input-output
amplifier with low power consumption. The EL5111T is a
single amplifier which exhibits beyond the rail input
capability, rail-to-rail output capability, and is unity gain
stable.
The maximum operating voltage range is from 4.5V to
19V. It can be configured for single or dual supply
operation, and typically consumes only 3mA. The
EL5111T has an output short circuit capability of
±300mA and a continuous output current capability of
±70mA.
The EL5111T features a high slew rate of 100V/μs, and
fast settling time. Also, the device provides common
mode input capability beyond the supply rails, rail-to-rail
output capability, and a bandwidth of 60MHz (-3dB). This
enables the amplifier to offer maximum dynamic range
at any supply voltage. These features make the EL5111T
an ideal amplifier solution for use in TFT-LCD panels as a
VCOM driver or static gamma buffer, and in high speed
filtering and signal conditioning applications. Other
applications include battery power and portable devices,
especially where low power consumption is important.
The EL5111T is available in small 5 Ld TSOT package. It
features a standard operational amplifier pinout. The
device operates over an ambient temperature range of
-40°C to +85°C.
Features
• 60MHz (-3dB) Bandwidth
• 4.5V to 19V Maximum Supply Voltage Range
• 100V/μs Slew Rate
• 3mA Supply Current
• ±70mA Continuous Output Current
• ±300mA Output Short Circuit Current
• Unity-gain Stable
• Beyond the Rails Input Capability
• Rail-to-rail Output Swing
• Built-in Thermal Protection
• -40°C to +85°C Ambient Temperature Range
• Pb-Free (RoHS Compliant)
Applications*(see page 13)
• TFT-LCD Panels
• VCOM Amplifiers
• Static Gamma Buffers
• Drivers for A/D Converters
• Data Acquisition
• Video Processing
• Audio Processing
• Active Filters
• Test Equipment
• Battery-powered Applications
• Portable Equipment
FIGURE 1. TYPICAL TFT-LCD VCOM APPLICATION
10
8
VS = ±5V
AV = 1
6
CL = 1.5pF
RL || 1kΩ (PROBE)
4
2
1kΩ
0
-2
-4
-6
-8
-10
100k
560Ω
150Ω
1M 10M
FREQUENCY (Hz)
100M
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS RL
May 27, 2010
FN6894.0
www.DataSheet.in
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

PagesPages 14
Télécharger [ EL5111T ]


Fiche technique recommandé

No Description détaillée Fabricant
EL5111 (EL5111 - EL5411) 60MHz Rail-to-Rail Input-Output Op Amps Intersil Corporation
Intersil Corporation
EL5111T 60MHz Rail-to-Rail Input-Output Operational Amplifier Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche