|
|
Número de pieza | HMC-APH633 | |
Descripción | GaAs HEMT MMIC POWER AMPLIFIER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC-APH633 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v03.0209
Typical Applications
This HMC-APH633 is ideal for:
• Short Haul / High Capacity Links
3 • Wireless LAN Bridges
• Military & Space
• E-Band Communication Systems
HMC-APH633
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 71 - 76 GHz
Features
Gain: 13 dB
P1dB: +20 dBm
Supply Voltage: +4V
50 Ohm Matched Input/Output
Die Size: 2.47 x 1.60 x 0.05 mm
Functional Diagram
General Description
The HMC-APH633 is a two stage GaAs HEMT MMIC
Medium Power Amplifier which operates between
71 and 76 GHz. The HMC-APH633 provides 13 dB
of gain, and an output power of +20 dBm at 1 dB
compression from a +4V supply voltage. All bond
pads and the die backside are Ti/Au metallized
and the amplifier device is fully passivated for reliable
operation. The HMC-APH633 GaAs HEMT MMIC
Medium Power Amplifier is compatible with conven-
tional die attach methods, as well as thermocomp-
ression and thermosonic wire bonding, making it
ideal for MCM and hybrid microcircuit applications.
All data shown herein is measured with the chip in
a 50 Ohm environment and contacted with RF
probes.
Electrical Specifications, TA = +25° C, Vdd1=Vdd2 = 4V, Idd1+Idd2 = 240 mA [2]
Parameter
Min. Typ. Max.
Frequency Range
71-76
Gain
9 13
Input Return Loss
8
Output Return Loss
10
Output power for 1dB Compression (P1dB)
20
Supply Current (Idd1+Idd2)
240
[1] Unless otherwise indicated, all measurements are from probed die.
[2] Adjust Vgg1=Vgg2 between -1V to +0.3V (typ. -0.1V) to achieve Iddtotal = 240 mA
Units
GHz
dB
dB
dB
dBm
mA
3 - 220
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v03.0209
Assembly Diagram
3
HMC-APH633
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 71 - 76 GHz
Note 1: Bypass caps should be 100 pF (approximately) ceramic (single-layer) placed no farther than 30 mils from the amplifier
Note 2: Best performance obtained from use of <10 mil (long) by 3 by 0.5mil ribbons on input and output.
3 - 224
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC-APH633.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC-APH633 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
HMC-APH634 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |