|
|
PDF HMC-APH460 Data sheet ( Hoja de datos )
| Número de pieza | HMC-APH460 | |
| Descripción | GaAs HEMT MMIC POWER AMPLIFIER | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC-APH460 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v02.0208
Typical Applications
This HMC-APH460 is ideal for:
• Point-to-Point Radios
3 • Point-to-Multi-Point Radios
• VSAT
• Military & Space
Functional Diagram
HMC-APH460
GaAs HEMT MMIC 0.5 WATT POWER
AMPLIFIER, 27 - 31.5 GHz
Features
Output IP3: +37 dBm
P1dB: +28 dBm
Gain: 14 dB
Supply Voltage: +5V
50 Ohm Matched Input/Output
Die Size: 3.10 x 1.26 x 0.1 mm
General Description
The HMC-APH460 is a two stage GaAs HEMT MMIC
0.5 Watt Power Amplifier which operates between
27 and 31.5 GHz. The HMC-APH460 provides
14 dB of gain, and an output power of +28 dBm at
1 dB compression from a +5V supply voltage. All
bond pads and the die backside are Ti/Au metallized
and the amplifier device is fully passivated for reliable
operation. The HMC-APH460 GaAs HEMT MMIC
0.5 Watt Power Amplifier is compatible with conven-
tional die attach methods, as well as thermo-
compression and thermosonic wirebonding, making
it ideal for MCM and hybrid microcircuit applications.
All data Shown herein is measured with the chip in a
50 Ohm environment and contacted with RF probes.
Electrical Specifications[1], TA = +25° C, Vdd1 = Vdd2 = 5V, Idd1 + Idd2 = 900 mA [2]
Parameter
Min. Typ. Max.
Frequency Range
27 - 31.5
Gain
12 14
Units
GHz
dB
Input Return Loss
7 dB
Output Return Loss
10
Output power for 1dB Compression (P1dB)
28
Output Third Order Intercept (IP3)
37
Saturated Output Power (Psat)
30
Supply Current (Idd1+Idd2)
900
[1] Unless otherwise indicated, all measurements are from probed die
[2] Adjust Vgg1=Vgg2 between -1V to +0.3V (typ -0.5V) to achieve Idd1 = 300 mA, Idd2 = 600 mA
dB
dBm
dBm
dBm
mA
3 - 172
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
Assembly Diagram
3
v02.0208
HMC-APH460
GaAs HEMT MMIC 0.5 WATT POWER
AMPLIFIER, 27 - 31.5 GHz
Note 1: Bypass caps should be 100 pF (approximately) ceramic (single-layer) placed no farther than 30 mils from the amplifier.
Note 2: Best performance obtained from use of <10 mil (long) by 3 by 0.5mil ribbons on input and output.
3 - 176
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC-APH460.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC-APH460 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
| HMC-APH462 | GaAs HEMT MMIC 1 WATT POWER AMPLIFIER | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |