DataSheetWiki


FSP3100 fiches techniques PDF

FOSLINK SEMICONDUCTOR - 600MA SYNCHRONOUS STEP-DOWN CONVERTER

Numéro de référence FSP3100
Description 600MA SYNCHRONOUS STEP-DOWN CONVERTER
Fabricant FOSLINK SEMICONDUCTOR 
Logo FOSLINK SEMICONDUCTOR 





1 Page

No Preview Available !





FSP3100 fiche technique
www.DataSheet4U.com
1.5 MHZ, 600MA SYNCHRONOUS STEP-DOWN CONVERTER
„ FEATURES
z High Efficiency : Up to 96%
z 1.5MHz Constant Switching Frequency
z 600mA Output Current at VIN=3.0V
z Integrated Main switch and synchronous rectifier.
No Schottky Diode Required
z 2.5V to 5.5V Input Voltage Range
z Output Voltage as low as 0.6V
z 100% Duty Cycle in Dropout
z Low Quiescent Current : 300uA
z 1uA Shutdown Current
z Slope Compensated Current Mode Control for
Excellent Line and Load Transient Response
z Short Circuit and Thermal Fault Protection
z Space Saving 5-pin SOT23 packages
„ APPLICATIONS
z Cellular and Smart Phones
z PDAs
z MP3 Player
z Digital Still and Video Cameras
z Portable instruments
z Microprocessors and DSP Core Supplies
z Wireless and DSL Modems
FSP3100
„ GENERAL DESCRIPTION
The FSP3100 is a 1.5MHz constant frequency; slope
compensated current mode PWM step-down
converter. The device integrates a main switch and a
synchronous rectifier for high efficiency without an
external Schottky diode. It is ideal for powering
portable equipment that runs from a single cell
lithium-Ion (Li+) battery. The FSP3100 can supply
600mA of load current from a 2.5V to 5.5V input
voltage. The output voltage can be regulated as low as
0.6V. The FSP3100 can also run at 100% duty cycle for
low dropout operation, extending battery life in portable
system. Idle mode operation at light loads provides
very low output ripple voltage for noise sensitive
applications.
The FSP3100 is offered in a low profile (1mm) 5-pin,
SOT package, and is available in an adjustable version
and fixed output voltage of 1.2V, 1.5V and 1.8V.
„ PIN CONFIGURATION
(Top View)
Run 1
GND 2
SW 3
5 VFB/VOUT
4 VIN
„ PIN DESCRIPTION
Pin Number
1
2
3
4
Pin Name
RUN
GND
SW
IN
5 FB/VOUT
Pin Function
Regulator Enable control input. Drive RUN above 1.5V to turn on the part.
Drive RUN below 0.3V to turn it off. In shutdown, all functions are disable
drawing 1uA supply current. Do not leave RUN floating.
Ground
Power Switch Output. It is the Switch node connection to inductor. This pin
connects to the drains of the internal P-CH and N-CH MOSFET switches.
Supply Input Pin. Must be closely decoupled to GND, pin2, with a 2.2uF or
greater ceramic capacitor.
VFB (FSP3100): Feedback Input Pin. Connected FB to the center point of
the external resistor divider. The feedback threshold voltage is 0.6V.
VOUT (FSP3100-1.2/1.5/1.8): Output Voltage Feedback Pin. An internal
resistive divider divides the output voltage down for comparison to the
internal reference voltage.
1/11 2007-1-29

PagesPages 11
Télécharger [ FSP3100 ]


Fiche technique recommandé

No Description détaillée Fabricant
FSP3100 600MA SYNCHRONOUS STEP-DOWN CONVERTER FOSLINK SEMICONDUCTOR
FOSLINK SEMICONDUCTOR

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche