DataSheetWiki


AD4C211-L fiches techniques PDF

Solid State Optronic - Solid State Relay

Numéro de référence AD4C211-L
Description Solid State Relay
Fabricant Solid State Optronic 
Logo Solid State Optronic 





1 Page

No Preview Available !





AD4C211-L fiche technique
AD4C211-Lwww.DataSheet4U.com
Dual 1 Form A
Solid State Relay
DESCRIPTION
The AD4C211-L is a bi-directional, double-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of two integrated circuits, each driving a pair of
rugged source-to-source enhancement type DMOS transistors. Each integrated circuit is optically coupled to a light emitting diode. This
device also includes current-limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the
current down, protecting downstream components.
FEATURES
APPLICATIONS
Current limiting (over-current protection)
Low input control power consumption (2.5mA TYP)
140mA maximum continuous load current
25 ohms maximum on-resistance
High input-to-output isolation
Long life/high reliability
Multiplexers
Meter reading systems
Data Acquisition
Medical equipment
Battery monitoring
Home/Safety security systems
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
-H High Input / Output isolation
-S Surface Mount Option
-TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
SCHEMATIC DIAGRAM
Transient Input Current
mA
400
Reverse Input Control
Voltage
Output Power Dissipation
V
mW
6
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
BABT CERTIFICATE #607836
CSA CERTIFICATE #LR111581-1
UL/C-UL FILE #E90096, E201932
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD4C211-L
rev 1.40 (10/25/2004)

PagesPages 5
Télécharger [ AD4C211-L ]


Fiche technique recommandé

No Description détaillée Fabricant
AD4C211-L Solid State Relay Solid State Optronic
Solid State Optronic

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche