DataSheet.es    


PDF HMC801LP3E Data sheet ( Hoja de datos )

Número de pieza HMC801LP3E
Descripción 15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR
Fabricantes Hittite Microwave 
Logotipo Hittite Microwave Logotipo



Hay una vista previa y un enlace de descarga de HMC801LP3E (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! HMC801LP3E Hoja de datos, Descripción, Manual

HMC801LP3Ewww.DataSheet4U.com
v01.0610
15 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
5
Typical Applications
The HMC801LP3E is ideal for both RF
and IF applications:
• Test Equipment and Sensors
• ISM, MMDS, WLAN, WiMAX, WiBro
• Microwave Radio & VSAT
• Cellular Infrastructure
Features
± 0.4 dB Typical Step Error
Low Insertion Loss: 2 dB
High IP3: +53 dBm
Single Control Line
TTL/CMOS Compatible Control
Single +5V Supply
16 Lead 3x3 mm SMT Package: 9 mm²
Functional Diagram
General Description
The HMC801LP3E is a broadband bidirectional 1-bit
GaAs IC digital attenuator in a low cost leadless sur-
face mount package. This single positive control line
digital attenuator utilizes off chip AC ground capaci-
tors for near DC operation, making it suitable for a
wide variety of RF and IF applications. Covering DC
to 10 GHz, the insertion loss is less than 2 dB typical
and attenuation accuracy is excellent at ±0.4 dB typi-
cal step error. The attenuator also features a high IIP3
of +53 dBm. One TTL/CMOS control input is used to
select the attenuation state and a single Vdd bias of
+5V is required.
5-1
Electrical Specifications, TA = +25° C, With Vdd = +5V & Vctl = 0/+5V
Parameter
Frequency (GHz)
Min.
Typ.
Insertion Loss
DC - 4 GHz
4 - 8 GHz
8 - 10 GHz
1.0
2.0
2.5
Attenuation Range
DC - 10 GHz
15
Return Loss (RF1 & RF2, Both States)
DC - 6 GHz
6 - 10 GHz
18
14
Attenuation Accuracy: (Referenced to Insertion Loss)
DC - 8 GHz
8 - 10 GHz
± 0.4
± 0.5
Input Power for 0.1 dB Compression
DC - 0.4 GHz
0.4 - 10 GHz
20
30*
Input Third Order Intercept Point
(Two-Tone Input Power= 0 dBm Each Tone)
DC - 0.4 GHz
0.4 - 10 GHz
43
53
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 10 GHz
120
150
Max.
2.0
3.0
3.5
± 0.6
± 0.7
Units
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
ns
ns
* For frequencies greater than 0.4 GHz, the 0.1 dB compression point is greater than the absolute maximum RF input power of 30 dBm.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC801LP3E pdf
5
HMC801LP3Ewww.DataSheet4U.com
v01.0610
15 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Pin Descriptions
Pin Number
Function
1 Vdd
2, 4, 9, 11
GND
3, 10
RF1, RF2
5, 8
6, 7, 12, 13,
15, 16
ACG1, ACG2
N/C
Description
Supply Voltage.
These pins and the exposed ground paddle
must be connected to RF/DC ground.
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
Select value based on lowest frequency of operation.
External capacitor to ground is required. Select value for
lowest frequency of operation. Place capacitor as close
to pins as possible.
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
Interface Schematic
14 V1
See truth table and control voltage table.
Application Circuit
5-5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet HMC801LP3E.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC801LP3E15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATORHittite Microwave
Hittite Microwave
HMC801LP3E15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATORHittite Microwave
Hittite Microwave

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar