|
|
Numéro de référence | ADP2120 | ||
Description | Step-Down DC-to-DC Regulators | ||
Fabricant | Analog Devices | ||
Logo | |||
1 Page
2 A/1.25 A, 1.2 MHz, Synchronous,www.DataSheet4U.com
Step-Down DC-to-DC Regulators
ADP2119/ADP2120
FEATURES
Continuous output current
ADP2119: 2 A
ADP2120: 1.25 A
145 mΩ and 70 mΩ integrated MOSFETs
Input voltage range from 2.3 V to 5.5 V
Output voltage from 0.6 V to VIN
±1.5% output accuracy
1.2 MHz fixed switching frequency
Synchronizable between 1 MHz and 2 MHz
Selectable PWM or PFM mode operation
Current mode architecture
Precision threshold enable input
Power-good flag
Voltage tracking
Integrated soft start
Internal compensation
Startup with precharged output
UVLO, OVP, OCP, and thermal shutdown
10-lead, 3 mm × 3 mm LFCSP_WD package
APPLICATIONS
Point of load conversion
Communications and networking equipment
Industrial and instrumentation
Consumer electronics
Medical applications
GENERAL DESCRIPTION
The ADP2119/ADP2120 are low quiescent current, synchronous,
step-down dc-to-dc regulators in a compact 3 mm × 3 mm
LFCSP_WD package. Both devices use a current mode, constant
frequency pulse-width modulation (PWM) control scheme for
excellent stability and transient response. Under light load conditions,
they can be configured to operate in a pulse frequency modulation
(PFM) mode, which reduces switching frequency to save power.
The ADP2119/ADP2120 support input voltages from 2.3 V to
5.5 V. The output voltage can be adjusted from 0.6 V up to the
input voltage (VIN) for the adjustable version, whereas the fixed
output version is available in preset output voltage options of 3.3 V,
2.5 V, 1.8 V, 1.5 V, 1.2 V, and 1.0 V. The ADP2119/ADP2120 require
minimal external parts and provide a high efficiency solution with
their integrated power switches, synchronous rectifiers, and internal
compensation. Each IC draws less than 2 μA current from the input
source when it is disabled. Other key features include undervoltage
lockout (UVLO), integrated soft start to limit inrush current at
startup, overvoltage protection (OVP), overcurrent protection
(OCP), and thermal shutdown (TSD).
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
TYPICAL APPLICATION CIRCUIT
C1
0.1µF
VIN
5V CIN
22µF
X5R
6.3V
R1
10Ω ADP2119/ADP2120
1 VIN
EN 10
VOUT
3.3V
COUT
22µF
X5R
6.3V
L
1.5µH
RTOP
10kΩ
RBOT
2.21kΩ
2 PVIN
3 SW
SYNC/MODE 9
R2
10kΩ
PGOOD 8
4 PGND
TRK 7
5 GND
FB 6
Figure 1.
100
VIN = 5V
90 VOUT = 1.8V
80
70
PFM
60
50
40
FPWM
30
20
10
0
0.01
0.1
OUTPUT CURRENT (A)
1
Figure 2. ADP2119 Efficiency vs. Output Current
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
|
|||
Pages | Pages 24 | ||
Télécharger | [ ADP2120 ] |
No | Description détaillée | Fabricant |
ADP2120 | Step-Down DC-to-DC Regulators | Analog Devices |
ADP2121 | Synchronous Step-Down DC-to-DC Converter | Analog Devices |
ADP2126 | (ADP2126 / ADP2127) DC-to-DC Converters | Analog Devices |
ADP2127 | (ADP2126 / ADP2127) DC-to-DC Converters | Analog Devices |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |