DataSheetWiki


P89LPC972 fiches techniques PDF

NXP Semiconductors - 8-bit microcontroller

Numéro de référence P89LPC972
Description 8-bit microcontroller
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





P89LPC972 fiche technique
www.DataSheet4U.com
P89LPC970/971/972
8-bit microcontroller with accelerated two-clock 80C51 core
2 kB/4 kB/8 kB wide-voltage byte-erasable flash
Rev. 02 — 27 April 2010
Product data sheet
1. General description
The P89LPC970/971/972 is a single-chip microcontroller, available in low cost packages,
based on a high performance processor architecture that executes instructions in two to
four clocks, six times the rate of standard 80C51 devices. Many system-level functions
have been incorporated into the P89LPC970/971/972 in order to reduce component
count, board space, and system cost.
2. Features and benefits
2.1 Principal features
„ 2 kB/4 kB/8 kB byte-erasable flash code memory organized into 1 kB sectors and
64-byte pages. Single-byte erasing allows any byte(s) to be used as non-volatile data
storage.
„ 256-byte RAM data memory.
„ Two analog comparators with selectable inputs and reference source.
„ Five 16-bit counter/timers (each may be configured to toggle a port output upon timer
overflow or to become a PWM output).
„ A 23-bit system timer that can also be used as real-time clock consisting of a 7-bit
prescaler and a programmable and readable 16-bit timer.
„ Enhanced UART with a fractional baud rate generator, break detect, framing error
detection, and automatic address detection; 400 kHz byte-wide I2C-bus
communication port.
„ SPI communication port (pin remap).
„ High-accuracy internal RC oscillator option 7.373 MHz calibrated to ±1 %, with clock
doubler option, allows operation without external oscillator components. The RC
oscillator option is selectable and fine tunable.
„ Watchdog timer with separate on-chip oscillator, nominal 400 kHz/25 kHz, calibrated to
±10 % at 400 kHz, requiring no external components. The watchdog prescaler is
selectable from eight values.
„ Pin remap for UART, I2C-bus and SPI.
„ 2.4 V to 5.5 V VDD operating range.
„ Enhanced low voltage (brownout) detect allows a graceful system shutdown when
power fails.
„ 20-pin TSSOP and DIP packages with 15 I/O pins minimum and up to 18 I/O pins
while using on-chip oscillator and reset options.

PagesPages 66
Télécharger [ P89LPC972 ]


Fiche technique recommandé

No Description détaillée Fabricant
P89LPC970 8-bit microcontroller NXP Semiconductors
NXP Semiconductors
P89LPC971 8-bit microcontroller NXP Semiconductors
NXP Semiconductors
P89LPC972 8-bit microcontroller NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche