DataSheet.es    


PDF HMC866LC3C Data sheet ( Hoja de datos )

Número de pieza HMC866LC3C
Descripción 32 Gbps LIMITING AMPLIFIER
Fabricantes Hittite Microwave 
Logotipo Hittite Microwave Logotipo



Hay una vista previa y un enlace de descarga de HMC866LC3C (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! HMC866LC3C Hoja de datos, Descripción, Manual

v00.1209
HMC866LC3Cwww.DataSheet4U.com
32 Gbps LIMITING AMPLIFIER
10
Typical Applications
The HMC866LC3C is ideal for:
• 100 Gbps Ethernet
• 100 Gbps Long Haul
• 40 Gbps (D)QPSK Receivers
• Broadband Gain Block for Test & Measurement
Equipment
Features
Supports Data Rates up to 43 Gbps.
Low Power Dissipation: 280 mW @ Vcc = +3.3V
Differential Small Signal Gain: 29 dB
Input Sensitivity: 20 mVp-p Differential
3-dB Bandwidth: 26.5 GHz
Adjustable Output Voltage
Swing up to 800 mVp-p Differential
16 Lead 3x3mm SMT package: 9mm2
10 - 22
Functional Diagram
General Description
The HMC866LC3C is a Limiting Amplifier packaged in
a leadless 3x3 mm ceramic surface mount package.
The amplifier supports up to 43 Gbps operation and
provides 29 dB of differential gain. The output voltage
swing is adjustable up to 800 mVp-p differential by
using the VAC analog control input and the additive
RMS jitter is less than 300 fs for 32 Gbps operation.
The amplifier allows external offset correction function
to both inputs and outputs.
All input/output RF signals of the HMC866LC3C are
terminated with 50 Ohms to +3.3V internally and
may be either AC or DC coupled. The outputs of the
device can be operated either differentially or single-
ended. Outputs can be connected directly to 50 Ohm
terminated system referenced to 3.3V, while DC
blocking capacitors may be used if the terminating
system is 50 Ohms to a non 3.3V level.
Electrical Specifications, TA = +25° C, Vcc = +3.3V, Vee = 0V, Icc = 85mA
Parameter
Conditions
Min.
Typ.
Differential Small Signal Gain
VAC = 1.6V
29
Data Rate
32
Small Signal Bandwidth
3-dB cutoff
26.5
Input Return Loss
Up to 26.5 GHz
10
Output Return Loss
Up to 26.5 GHz
10
Input Sensitivity
Differential
20
Maximum Input Swing
Differential
1,000
Differential Output Swing
Rise Time [1]
Adjustable by using VAC
20% - 80% @ 32 Gbps
250
13
[1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern
Max.
800
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Units
dB
Gbps
GHz
dB
dB
mVp-p
mVp-p
mVpp
ps

1 page




HMC866LC3C pdf
v00.1209
10
Absolute Maximum Ratings
Power Supply Voltage (Vcc)
Input Voltage
Output Voltage
Output Amplitude Control Voltage (VAC)
Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 12.22 mW/°C above 85°C)
Thermal Resistance (Rth)
(junction to ground paddle)
Storage Temperature
Operating Temperature
-0.5V to +3.6V
(Vcc -1.3V) to
(Vcc +0.5)
(Vcc -1V) to
(Vcc +0.5)
-0.5V to +2.5V
125 °C
0.49W
81.83 °C/W
-65 to 125 °C
-40 to +85 °C
Outline Drawing
HMC866LC3Cwww.DataSheet4U.com
32 Gbps LIMITING AMPLIFIER
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST NOT BE DC GND. THERMAL DISSIPATION PATH ONLY.
10 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet HMC866LC3C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC866LC3C32 Gbps LIMITING AMPLIFIERHittite Microwave
Hittite Microwave

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar