PDF HMC915LP4E Data sheet ( Hoja de datos )

Número de pieza	HMC915LP4E
Descripción	GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER
Fabricantes	Hittite Microwave
Logotipo
Hay una vista previa y un enlace de descarga de HMC915LP4E (archivo pdf) en la parte inferior de esta página. Total 8 Páginas
No Preview Available ! v01.0510 10 Typical Applications The HMC915LP4E is ideal for: • PCS / 3G Infrastructure • Base Stations & Repeaters • WiMAX & WiBro • ISM & Fixed Wireless Functional Diagram HMC915LP4Ewww.DataSheet4U.com GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz Features Input IP3: +28 dBm Low Input LO Drive: -2 to +4 dBm High LO to RF Isolation: 28 dB Low Conversion Loss: 8 dB Single Positive Supply: +5V @ 88 mA 24 Lead 4x4mm SMT Package: 16mm2 General Description The HMC915LP4E is a high linearity, double-balanced converter that operates from 0.5 to 2.7 GHz and delivers a +28 dBm input IP3. The LO amplifier output and high dynamic range mixer input are positioned so that an external LO filter can be placed in series between them if necessary. The converter provides 28 dB of LO to RF isolation and is ideal for upconver- ter and downconverter applications. The IC operates from a single +5V supply consuming 88 mA and ac- cepts LO drive levels of -2 to +4 dBm. The design requires no external baluns and supports IF frequ- encies between DC and 1 GHz. The HMC915LP4E is pin for pin compatible with the HMC552LP4E and the HMC215LP4E mixers with integrated LO amplifiers. Electrical Specifications, TA = +25°C, LO = +2 dBm, Vcc = +5V, IF = 100 MHz* Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range, RF, LO 0.5 - 2.0 2.0 - 2.7 GHz Frequency Range, IF DC - 1.0 DC - 1.0 GHz Conversion Loss 8 11 10 13 dB Noise Figure (SSB) 8.5 10.5 dB LO to RF Isolation 22 30 25 28 dB LO to IF Isolation 10 16 12 18 dB IP3 (Input) 28 28 dBm 1 dB Compression (Input) 18 20 dBm LO Drive Input Level (Typical) -2 to 4 +2 to 6 dBm Supply Current (Icc) 78 88 110 78 88 110 mA *Unless otherwise noted, all measurements performed as a downconverter, with low side LO and configured as shown in application circuit. 10 - 474 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 1 page Outline Drawing 10 v01.0510 HMC915LP4Ewww.DataSheet4U.com GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.5 - 2.7 GHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC915LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C MSL Rating MSL1 [2] Package Marking [1] H915 XXXX 10 - 478 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 5 Page

Páginas	Total 8 Páginas
PDF Descargar	[ Datasheet HMC915LP4E.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
HMC915LP4E	GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER	Hittite Microwave

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar