|
|
Numéro de référence | VNQ830PEP-E | ||
Description | QUAD CHANNEL HIGH SIDE DRIVER | ||
Fabricant | ST Microelectronics | ||
Logo | |||
1 Page
www.DataSheet4U.com
VNQ830PEP-E
QUAD CHANNEL HIGH SIDE DRIVER
Table 1. General Features
TYPE
RDS(on)
IOUT
VNQ830PEP-E 60 mΩ (*) 14 A (*)
(*) Per channel
VCC
36 V
s CMOS COMPATIBLE INPUTS
s OPEN DRAIN STATUS OUTPUTS
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s LOSS OF GROUND PROTECTION
s VERY LOW STAND-BY CURRENT
s REVERSE BATTERY PROTECTION (**)
s IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
Figure 1. Package
TARGET SPECIFICATION
PowerSSO-24
DESCRIPTION
The VNQ830PEP-E is a monolithic device
designed in STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground.
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects open
load condition both in on and off state. Output
shorted to VCC is detected in the off state.Device
automatically turns off in case of ground pin
disconnection.
Table 2. Order Codes
Package
PowerSSO-24
Note: (**) See application schematic at page 9.
Tube
VNQ830PEP-E
Tape and Reel
VNQ830PEPTR-E
Rev. 1
October 2004
1/17
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
|
|||
Pages | Pages 17 | ||
Télécharger | [ VNQ830PEP-E ] |
No | Description détaillée | Fabricant |
VNQ830PEP-E | QUAD CHANNEL HIGH SIDE DRIVER | ST Microelectronics |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |