|
|
Numéro de référence | UPDS5100H | ||
Description | 5 Amp 100V High Voltage Schottky Barrier Rectifier | ||
Fabricant | Microsemi | ||
Logo | |||
1 Page
SCOTTSDALE DIVISION
UPDS5100H
5 Amp 100 Volt High Voltage Schottky
Barrier Rectifier
www.DataSheet4U.com
DESCRIPTION
The UPDS5100H offers a small and powerful surface mount package for a
100 Volt 5 Amp rated Schottky with low forward voltage and very low
leakage current. For critical applications requiring very fast switching,
these Schottky higher reverse voltage ratings with their “hot carrier”
features provide extremely fast switching to replace conventional ultrafast
rectifiers. The very low thermal resistance of the PowerDI™5 package
design permits cooler operating junction temperatures for minimal reverse
leakage currents and lower power loss.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
PowerDI™5
FEATURES
• Guard Ring Die Construction for Transient Protection
• High Current Low Forward Voltage Drop
• Very Low Leakage Current
• High Junction Temperature Capability
• High Forward Surge Current Capability
• “Green” Molding Compound (No Br, Sb)
• Low inductive parasitics for minimal Ldi/dt effects
• Lead-Free Finish & RoHS Compliant per EU Directive
Rev 13.2.2003 (Glass and High Temperature Solder
Exemptions Applied per Annex Notes 5 and 7)
APPLICATIONS / BENEFITS
• Silicon Schottky (hot carrier) rectifier for minimal trr
and elimination of reverse-recovery oscillations to
reduce need for EMI filtering
• For use in high-frequency switching power supplies,
inverters, free wheeling, and polarity protection
applications
• Low power loss and high efficiency
• Robust package configuration for pick-and-place
handling
• Full-metallic bottom eliminates flux entrapment
MAXIMUM RATINGS
•
Junction
+150oC
and
Storage
Temperature
(TJ,
TSTG):
-65
to
• Average Rectified Output Current (IO): 5 Amps for
Single phase, half wave, 60Hz, resistive or inductive
load (also see Figure 5). For capacitive load, derate
current by 20%.
• Peak Repetitive Reverse Voltage (VRRM): 100 V
Working Peak Reverse Voltage (VRWM): 100 V
DC Blocking Voltage (VR): 100 V
• RMS Reverse Voltage (VR(RMS): 71 V
• Non-Repetitive Peak Forward Surge Current @ 8.3 ms
Single half sine-wave Superimposed on Rated Load
(IFSM): 250A
• Thermal Resistance Junction to case bottom (RθJC) or
Soldering Point (RθJS): 2.0oC/W
• Thermal Resistance (RθJA): 110oC/W junction to
ambient when mounted on FR-4 PCB, 2 oz. Copper and
minimum recommended pad layout (see last page)
MECHANICAL AND PACKAGING
• Case Material: Molded Plastic, Environmentally
Friendly “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture sensitivity: Level 1 per J-STD-020C.
• Terminals: Finish – Matte Tin annealed over
Copper lead frame (
per JESD97) Solderable
per MIL-STD-202, Method 208
• Marking: See marking information on page 3
• Polarity: See Diagram
• Weight: 0.096 grams (approx.)
• Tape & Reel Option: 5000/reel (13”)
Copyright 2004
12-14-2004 REV 0
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
|
|||
Pages | Pages 4 | ||
Télécharger | [ UPDS5100H ] |
No | Description détaillée | Fabricant |
UPDS5100H | 5 Amp 100V High Voltage Schottky Barrier Rectifier | Microsemi |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |