DataSheet.es    


PDF BD3538FVM Data sheet ( Hoja de datos )

Número de pieza BD3538FVM
Descripción Regulator IC
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de BD3538FVM (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! BD3538FVM Hoja de datos, Descripción, Manual

www.DataSheet4U1./c4om
STRUCTURE
TYPE
PRODUCT SERIES
FUNCTION
Silicon Monolithic Integrated Circuit
Regulator IC for Memory Termination
BD3538FVM
Built-in Push-pull Amplifier for Termination (VTT)
Built-in Reference Voltage Circuit (VREF)
Dual Channel (DDR-)
ABSOLUTE MAXIMUM RATINGSTa=25℃)
Parameter
Input Voltage
Enable Input Voltage
Termination Input Voltage
VDDQ Reference Voltage
Symbol
VCC
VEN
VTT_IN
VDDQ
Limit
7 *1*2
7 *1*2
7 *1*2
7 *1*2
Output Current
Power Dissipation
ITT 1
Pd 437.5 *3
Operating Temperature Range
Topr -40+105
Storage Temperature Range
Tstg -55+150
Maximum Junction Temperature
Tjmax
+150
*1 Should not exceed Pd.
*2 Instantaneous surge voltage, back electromotive force and voltage under less than 10% duty cycle.
*3 Reduced by 3.5mW for each increase in Ta of 1over 25℃(With no heat sink.
Unit
V
V
V
V
A
mW
OPERATING CONDITIONSTa=25℃)
Parameter
Symbol
Input Voltage
VCC
Termination Input Voltage
VTT_IN
VDDQ Reference Voltage
VDDQ
Enable Input Voltage
VEN
This product is designed for protection against radioactive rays.
MIN MAX Unit
2.7 5.5
V
1.0 5.5
V
1.0 2.75
V
-0.3 5.5
V
Status of this document
The Japanese version of this document is the official specification.
This translated version is intended only as a reference, to aid in understanding the official version.
If there are any differences between the original and translated versions of this document, the official Japanese language version takes priority.
REV. B

1 page




BD3538FVM pdf
Appendix
www.DataSheet4U.com
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM
CO.,LTD.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM
upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account
when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no re-
sponsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples
of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to
use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no re-
sponsibility whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment
or devices (such as audio visual equipment, office-automation equipment, communication devices, elec-
tronic appliances and amusement devices).
The Products are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your
use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system
which requires an extremely high level of reliability the failure or malfunction of which may result in a direct
threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,
aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear
no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intend-
ed to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under
the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
THE AMERICAS / EUROPE / ASIA / JAPAN
www.rohm.com
Contact us : webmaster@ rohm.co.jp
Copyright © 2009 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix-Rev4.0

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet BD3538FVM.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BD3538FVMRegulator ICROHM Semiconductor
ROHM Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar