DataSheetWiki


RFW122 fiches techniques PDF

Vishay RFWaves - RFW122-M-PA ISM Transceiver Module

Numéro de référence RFW122
Description RFW122-M-PA ISM Transceiver Module
Fabricant Vishay RFWaves 
Logo Vishay RFWaves 





1 Page

No Preview Available !





RFW122 fiche technique
RFW122w-wMw.-DPataASheIeSt4MU.com
Vishay RFWaves
RFW122-M-PA ISM Transceiver Module with Power Amplifier
DESCRIPTION
The RFW122-M-PA is a small PCB module which
includes the RFW122-M module, besed on Vishay
RFWaves* RFW122 transceiver chipset, and a Power
Amplifier module. This module was created in order to
provide a solution for applications that have a need of
longer range than provided by the basic RFW122-M
19581
module.
The company’s products are covered by one or more
of the following:
Taiwan Patent No. 155994, Taiwan Patent No.
176767, USA Patent No. 6,535,545. Other patents
pending
The module consists of 2 main parts:
1. RFW122-M module - Based on Vishay RFWaves
RFW122 transceiver chipset
2. Carrier board which includes:
PA chip - A half-duplex RF power amplifier
module on chip with internal antenna
diversity support
A 9 pin application header for main board
connection
Tx/Rx switch
2 RF output ports
RF SAW filter
* Vishay Advanced Technologies ltd. -
RFWaves division
CHARACTERISTICS
Parameter
Basic transceiver
Typical output power
Typical receive sensitivity
Typical total link budget
Typical current consumption in transmit (Tx) mode (*)
Typical current consumption in receive (Rx) mode
Averange current consumption
Typical standby current consumption
Antenna diversity
Antenna switch time
Antenna impedance
Antenna mechanical interface
Main board interface
Module dimensions (without antenna)
Carrier PCB thickness
Total module thickness
(*) This power consumption is under 1 Mbps, 50 % ‘1’ and 50 % ‘0’
Value
RFW122-M, 1 mbps, DSSS.
25 dBm peak
- 73 dBm peak
97 db
210 mA
35 mA
Depending on application (usually much lower than peak due to time
sharing between Tx, Rx and standby)
< 100 uA
Two antenna ports and an externally controlled switch, allowing the
application to decide which antenna is active (space diversity
implementation)
Typical < 1 usec
50 ohm unbalanced
Pads for soldering MMCX connectors or mechanical holes for direct
soldering of coaxial cable.
Note: no cable or connector is provided with the module.
9 pin, 2 mm pitch, 1.2 mm diameter.
45 x 21 mm
0.6 mm
5 mm
Document Number 84776
Rev. 1.1, 12-Dec-05
For more information please contact: [email protected]
www.vishay.com
1

PagesPages 4
Télécharger [ RFW122 ]


Fiche technique recommandé

No Description détaillée Fabricant
RFW122 RFW122-M-PA ISM Transceiver Module Vishay RFWaves
Vishay RFWaves
RFW122-M RFW122-M-PA ISM Transceiver Module Vishay RFWaves
Vishay RFWaves
RFW122-M-PA RFW122-M-PA ISM Transceiver Module Vishay RFWaves
Vishay RFWaves

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche