|
|
Numéro de référence | TDA1566 | ||
Description | single channel 92 W/1 amplifer | ||
Fabricant | NXP Semiconductors | ||
Logo | |||
1 Page
TDA1566
www.DataSheet4U.com
I2C-bus controlled dual channel 46 W/2 Ω, single channel
92 W/1 Ω amplifier with load diagnostic features
Rev. 01 — 5 April 2006
Product data sheet
1. General description
The TDA1566 is a car audio power amplifier with a complementary output stage realized
in BCDMOS technology. The TDA1566 has two Bridge Tied Load (BTL) output stages and
comes in a HSOP24 or DBS27P package.
The TDA1566 can be controlled with or without I2C-bus. With I2C-bus control gain settings
per channel and diagnostic trigger levels can be selected. Failure conditions as well as
load identification can be read with I2C-bus. The load identification detects whether the
outputs of a BTL channel are connected with a DC or AC load and discriminates between
a speaker load, a line driver load and an open (unconnected) load.
The TDA1566 can be configured in a single BTL mode and drive a 1 Ω load. For the single
BTL mode it is necessary to connect on the Printed-Circuit Board (PCB) the outputs of
both BTL channels in parallel.
2. Features
I Operates in I2C-bus mode and non-I2C-bus mode
I TH version: four I2C-bus addresses controlled by two pins; J version: two I2C-bus
addresses controlled by one pin
I Two 4 Ω or 2 Ω capable BTL channels or one 1 Ω capable BTL channel
I Low offset
I Pop free off/standby/mute/operating mode transitions
I Speaker fault detection
I Selectable gain (26 dB and 16 dB)
I In I2C-bus mode:
N DC load detection: open, short and speaker or line driver present
N AC load (tweeter) detection
N Programmable trigger levels for DC and AC load detection
N Per channel programmable gain (26 dB and 16 dB, selectable per channel)
N Selectable diagnostic levels for clip detection and thermal pre-warning
N Selectable information on the DIAG pin for clip information of each channel
separately and independent enabling of thermal-, offset- or load fault
I Independent short-circuit protection per channel
I Loss of ground and open VP safe
I All outputs short-circuit proof to VP, GND and across the load
I All pins short-circuit proof to ground
I Temperature controlled gain reduction at high junction temperatures
|
|||
Pages | Pages 45 | ||
Télécharger | [ TDA1566 ] |
No | Description détaillée | Fabricant |
TDA1560Q | 40 W car radio high power amplifier | NXP Semiconductors |
TDA1561Q | 2 x 23 W high efficiency car radio power amplifier | NXP Semiconductors |
TDA1562Q | 70 W high efficiency power amplifier with diagnostic facility | NXP Semiconductors |
TDA1563Q | 2 x 25 W high efficiency car radio power amplifier | NXP Semiconductors |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |