DataSheet.es    


PDF HMC538LP4 Data sheet ( Hoja de datos )

Número de pieza HMC538LP4
Descripción 600c ANALOG PHASE SHIFTER - 6 - 15 GHz
Fabricantes Hittite Microwave 
Logotipo Hittite Microwave Logotipo



Hay una vista previa y un enlace de descarga de HMC538LP4 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! HMC538LP4 Hoja de datos, Descripción, Manual

v00.0505
Typical Applications
The HMC538LP4 / HMC538LP4E is ideal for:
• Fiber Optics
• Military
• Test Equipment
Functional Diagram
14
HMC538LP4 / 538LP4E
www.DataSheet4U.com
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Features
Available as Lead Free
Wide Bandwidth: 6 - 15 GHz
>600° Phase Shift
Single Positive Voltage Control
QFN Leadless SMT Package, 16 mm2
General Description
The HMC538LP4 & HMC538LP4E are Analog Phase
Shifters which are controlled via an analog control volt-
age from 0 to +5V. THe HMC538LP4 & HMC538LP4E
provide a continuously variable phase shift of 0 to 800
degrees at 6 GHz, and 0 to 450 degrees at 16 GHz,
with consistent insertion loss versus phase shift. The
phase shift is monotonic with respect to control volt-
age. The control port has a modulation bandwidth
of 50 MHz. The low insertion loss and compact size
enable this part to be used in a wide range of applica-
tions, including the phase adjustment of clocks in fiber
optic systems and test equipment. THe HMC538LP4
& HMC538LP4E are housed in leadless QFN surface
mount packages and are available in both standard
and RoHS compliant versions.
Electrical Specifications, TA = +25° C, 50 Ohm System
Parameter
Frequency (GHz)
Min.
Typ.
Max.
Units
Phase Shift Range
Insertion Loss
6 - 10 GHz
10 - 15 GHz
6 - 15 GHz
600 800
360 600
8
degrees
degrees
11 dB
Return Loss (Input and Output)
6 - 15 GHz
7 dB
Control Voltage Range
Modulation Bandwidth
6 - 15 GHz
6 - 15 GHz
0-5
50
Volt
MHz
Phase Voltage Sensitivity
6 - 15 GHz
120 deg /Volt
Insertion Phase Temperature Sensitivity
6 - 15 GHz
0.5 deg /°C
14 - 288
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC538LP4 pdf
v00.0505
Outline Drawing
HMC538LP4 / 538LP4E
www.DataSheet4U.com
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
14
Package Information
Part Number
Package Body Material
HMC538LP4
Low Stress Injection Molded Plastic
HMC538LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Lead Finish
Sn/Pb Solder
100% matte Sn
MSL Rating
MSL1 [1]
MSL1 [2]
Package Marking [3]
H538
XXXX
H538
XXXX
Pin Descriptions
Pin Number
1, 2, 4-15,
17-20, 22-24
Function
N/C
3 RFIN
16 RFOUT
Description
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
Port is DC blocked.
Port is DC blocked.
Interface Schematic
Phase shift control pin. Application of a voltage between 0 and 5 volts causes
21 Vctl the transmission phase to change. The DC equivalent circuit is a series con-
nected diode and resistor.
14 - 292
GND
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet HMC538LP4.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC538LP4600c ANALOG PHASE SHIFTER - 6 - 15 GHzHittite Microwave
Hittite Microwave
HMC538LP4E600c ANALOG PHASE SHIFTER - 6 - 15 GHzHittite Microwave
Hittite Microwave

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar