DataSheetWiki


DAC121S101 fiches techniques PDF

National Semiconductor - 12-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output

Numéro de référence DAC121S101
Description 12-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





DAC121S101 fiche technique
June 2005
www.DataSheet4U.com
DAC121S101
12-Bit Micro Power Digital-to-Analog Converter with
Rail-to-Rail Output
General Description
The DAC121S101 is a full-featured, general purpose 12-bit
voltage-output digital-to-analog converter (DAC) that can
operate from a single +2.7V to 5.5V supply and consumes
just 177 µA of current at 3.6 Volts. The on-chip output
amplifier allows rail-to-rail output swing and the three wire
serial interface operates at clock rates up to 30 MHz over the
specified supply voltage range and is compatible with stan-
dard SPI, QSPI, MICROWIRE and DSP interfaces. Com-
petitive devices are limited to 20 MHz clock rates at supply
voltages in the 2.7V to 3.6V range.
The supply voltage for the DAC121S101 serves as its volt-
age reference, providing the widest possible output dynamic
range. A power-on reset circuit ensures that the DAC output
powers up to zero volts and remains there until there is a
valid write to the device. A power-down feature reduces
power consumption to less than a microWatt.
The low power consumption and small packages of the
DAC121S101 make it an excellent choice for use in battery
operated equipment.
The DAC121S101 is a direct replacement for the AD5320
and the DAC7512 and is one of a family of pin compatible
DACs, including the 8-bit DAC081S101 and the 10-bit
DAC101S101. The DAC121S101 operates over the ex-
tended industrial temperature range of −40˚C to +105˚C.
Features
n Guaranteed Monotonicity
n Low Power Operation
n Rail-to-Rail Voltage Output
n Power-on Reset to Zero Volts Output
n SYNC Interrupt Facility
n Wide power supply range (+2.7V to +5.5V)
n Small Packages
n Power Down Feature
Key Specifications
n Resolution
12 bits
n DNL
+0.25, -0.15 LSB (typ)
n Output Settling Time
8 µs (typ)
n Zero Code Error
4 mV (typ)
n Full-Scale Error
−0.06 %FS (typ)
n Power Consumption
— Normal Mode 0.64mW (3.6V) / 1.43mW (5.5V) typ
— Pwr Down Mode 0.14µW (3.6V) / 0.39µW (5.5V) typ
Applications
n Battery-Powered Instruments
n Digital Gain and Offset Adjustment
n Programmable Voltage & Current Sources
n Programmable Attenuators
Pin Configuration
20114901
Ordering Information
Order Numbers
DAC121S101CIMM
DAC121S101CIMMX
DAC121S101CIMK
DAC121S101CIMKX
DAC121S101EVAL
Temperature Range
−40˚C TA +105˚C
−40˚C TA +105˚C
−40˚C TA +105˚C
−40˚C TA +105˚C
SPIis a trademark of Motorola, Inc.
© 2005 National Semiconductor Corporation DS201149
20114902
Package
MSOP
MSOP Tape-and-Reel
TSOT
TSOT Tape-and-Reel
Evaluation Board
Top Mark
X60C
X60C
X61C
X61C
www.national.com

PagesPages 19
Télécharger [ DAC121S101 ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC121S101 DAC121S101/-Q1 12-Bit Micro Power RRO Digital-to-Analog Converter (Rev. J) Texas Instruments
Texas Instruments
DAC121S101 12-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output National Semiconductor
National Semiconductor
DAC121S101-Q1 DAC121S101/-Q1 12-Bit Micro Power RRO Digital-to-Analog Converter (Rev. J) Texas Instruments
Texas Instruments
DAC121S101Q RRO Digital-to-Analog Converter National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche