|
|
PDF HMC526LC4 Data sheet ( Hoja de datos )
| Número de pieza | HMC526LC4 | |
| Descripción | GaAs MMIC I/Q MIXER 6 - 10 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC526LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.0405
Typical Applications
The HMC526LC4 is ideal for:
• Point-to-Point Radios
7 • Point-to-Mulit-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
Functional Diagram
HMC526LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 40 dB
LO to RF Isolation: 50 dB
High Input IP3: +28 dBm
RoHS Compliant 4 x 4 mm SMT Package
General Description
The HMC526LC4 is a compact general purpose I /Q
MMIC mixer in a leadless RoHS compliant SMT pack-
age, which can be used as either an Image Reject
Mixer or a Single Sideband Upconverter. The mixer
utilizes two standard Hittite double balanced mixer
cells and a 90 degree hybrid fabricated in a GaAs
MESFET process. A low frequency quadrature hybrid
was used to produce a 100 MHz USB IF output. This
product is a much smaller alternative to hybrid style
Image Reject Mixers and Single Sideband Upcon-
verter assemblies. The HMC526LC4 eliminates the
need for wire bonding allowing use of surface mount
manufacturing techniques.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +19 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
6 - 10
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7.5
Image Rejection
20 30
1 dB Compression (Input)
+19
LO to RF Isolation
35 45
LO to IF Isolation
15 20
IP3 (Input)
+25
Amplitude Balance
0.5
Phase Balance
5
* Unless otherwise noted, all measurements performed as downconverter.
Max.
10
Min. Typ.
7 - 8.5
DC - 3.5
7.5
28 40
+20
38 50
16 22
+30
0.2
5
Max.
9.5
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
7 - 388
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0405
HMC526LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
7
Pin Descriptions
Pin Number
Function
1, 2, 6-8, 10,
13, 17-24
N/C
3, 5, 12, 14,
16
GND
4 RF
9 IF1
11 IF2
15 LO
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must be connected
to RF/DC ground.
This pin is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pin is DC coupled. For applications
not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
source/sink more than 3mA of current or part non-function
and possible part failure will result.
This pin is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
Interface Schematic
7 - 392
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC526LC4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC526LC4 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |