|
|
PDF HMC523 Data sheet ( Hoja de datos )
| Número de pieza | HMC523 | |
| Descripción | GaAs MMIC I/Q MIXER 15 - 23.6 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC523 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.1104
Typical Applications
The HMC523 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
3 • Digital Radio
• Military
• VSAT
Functional Diagram
HMC523
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
15 - 23.6 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 27 dB
LO to RF Isolation: 50 dB
High Input IP3: +25 dBm
General Description
The HMC523 is a compact I /Q MMIC mixer which can
be used as either an Image Reject Mixer or a Single
Sideband Upconverter. The chip utilizes two standard
Hittite double balanced mixer cells and a 90 degree
hybrid fabricated in a GaAs MESFET process. All
data shown below is taken with the chip mounted in
a 50 Ohm test fixture and includes the effects of 1 mil
diameter x 20 mil length bond wires on each port. A
low frequency quadrature hybrid was used to produce
a 100 MHz USB IF output. This product is a much
smaller alternative to hybrid style Image Reject Mixers
and Single Sideband Upconverter assemblies.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +17 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
15 - 21
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
8
Image Rejection
20 27
1 dB Compression (Input)
+15
LO to RF Isolation
40 50
LO to IF Isolation
20 25
IP3 (Input)
+25
Amplitude Balance
0.3
Phase Balance
2
* Unless otherwise noted, all measurements performed as downconverter.
Max.
10
Min. Typ.
21 - 23.6
DC - 3.5
9.5
20 25
+18
40 50
17 22
+20
0.3
3
Max.
11.5
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
3 - 138
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.1104
HMC523
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
15 - 23.6 GHz
3
Pad Descriptions
Pad Number
Function
1 RF
4 LO
2 (5)
IF2
3 (6)
IF1
GND
Description
This pad is AC coupled and matched to
50 Ohms from 15 to 23.6 GHz.
This pad is AC coupled and matched to
50 Ohms from 15 to 23.6 GHz.
This pad is DC coupled. For applications not requir-
ing operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pad must not
source/sink more than 3mA of current or die non-
function and possible die failure will result. Pads 5
and 6 are alternate IF ports.
The backside of the die must be connected
to RF/DC ground.
Interface Schematic
Assembly Diagrams
3 - 142
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC523.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC520 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
| HMC520A | MMIC I/Q Mixer |  Analog Devices |
| HMC520LC4 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
| HMC521 | GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |