|
|
Número de pieza | HMC520LC4 | |
Descripción | GaAs MMIC I/Q MIXER 6 - 10 GHz | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC520LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v00.1204
Typical Applications
The HMC520LC4 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
7 • Digital Radio
• VSAT
Functional Diagram
HMC520LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 40 dB
LO to RF Isolation: 50 dB
High Input IP3: +23 dBm
RoHS Compliant 4 x 4 mm SMT Package
General Description
The HMC520LC4 is a compact I /Q MMIC mixer in a
leadless “Pb free” SMT package, which can be used
as either an Image Reject Mixer or a Single Sideband
Upconverter. The mixer utilizes two standard Hittite
double balanced mixer cells and a 90 degree hybrid
fabricated in a GaAs MESFET process. A low freq-
uency quadrature hybrid was used to produce a 100
MHz USB IF output. This product is a much smaller
alternative to hybrid style Image Reject Mixers
and Single Sideband Upconverter assemblies. The
HMC520LC4 eliminates the need for wire bonding
allowing use of surface mount manufacturing
techniques.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +15 dBm*
Parameter
Min. Typ. Max.
Frequency Range, RF/LO
6 - 10
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7
Image Rejection
20 30
1 dB Compression (Input)
+12
LO to RF Isolation
35 45
LO to IF Isolation
16 20
IP3 (Input)
+22
Amplitude Balance
0.3
Phase Balance
4
* Unless otherwise noted, all measurements performed as downconverter.
10
Min. Typ.
7.1 - 8.5
DC - 3.5
7
28 40
+12
40 50
18 22
+23
0.2
4
Max.
9
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
7 - 358
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v00.1204
HMC520LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
7
Pin Descriptions
Pin Number
Function
1, 2, 6-8, 10,
13, 17-24
N/C
3, 5, 12,
14, 16
GND
4 RF
9 IF1
11 IF2
15 LO
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must
be connected to RF/DC ground.
This pin is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pin is DC coupled. For applications not requir-
ing operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency range.
For operation to DC, this pin must not source/sink more
than 3mA of current or part non-function and possible
part failure will result.
This pin is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
Interface Schematic
7 - 362
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC520LC4.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC520LC4 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |