DataSheetWiki


SC2443 fiches techniques PDF

Semtech Corporation - Dual-Phase Single or Two Output Synchronous Step-Down Controller

Numéro de référence SC2443
Description Dual-Phase Single or Two Output Synchronous Step-Down Controller
Fabricant Semtech Corporation 
Logo Semtech Corporation 





1 Page

No Preview Available !





SC2443 fiche technique
POWER MANAGEMENT
Features
u Wide input voltage range: 4.7V to 16V
u 0.5V feedback voltage for low-voltage outputs
u Programmable frequency up to 1 MHz per phase
u 2-Phase synchronous continuous conduction mode for
high efficiency step-down converters
u Out-of-phase operation for low input current ripples
u Output source and sink currents
u Fixed frequency peak current-mode control
u 75mV/-110mV maximum current sense voltage
u Inductor DCR current-sensing for low-cost applications
u Dual outputs or 2-phase single output operation
u Excellent current sharing between individual phases
u Individual soft-start, overload shutdown and enable
u External reference input for DDR applications
u External synchronization
u Industrial temperature range
u 4mm X 4mm X1mm 24-lead MLPQ package
Applications
u Telecommunication power supplies
u DDR memory power supplies
u Graphic power supplies
u Servers and base stations
Typical Application Circuit
SC2443
Dual-Phase Single or Two Output
Synchronous Step-Dowwwwn.DaCtaSohenet4tUr.coomller
Description
The SC2443 is a high-frequency dual synchronous step-down
switching power supply controller. It provides out-of-phase
high-current output gate drives to all N-channel MOSFET power
stages. The SC2443 operates in synchronous continuous-con-
duction mode. Both phases are capable of maintaining regula-
tion with sourcing or sinking load currents, making the SC2443
suitable for generating both VDDQ and the tracking VTT for
DDR applications.
The SC2443 employs fixed frequency peak current-mode con-
trol for the ease of frequency compensation and fast transient
response.
The dual-phase step-down controllers of the SC2443 can be
used to produce two individually controlled and regulated out-
puts or a single output with shared current in each phase. The
Step-down controllers operate from an input of at least 4.7V
and are capable of regulating outputs as low as 0.5V
Individual soft-start and overload shutdown timer is included
in each step-down controller. The SC2443 implements hiccup
overload protection. In single output current share configura-
tion, the master timer controls the soft-start and overload shut-
down functions of both controllers.
VOUT1 VP1
VIN
U1
IN1- 1 IN1-
2 COMP1
3 SYNC
4 AGND
SC2443
5 REF
6 REFIN
GDL1 18
PVCC 17
PGND 16
GDL2 15
GDH2 14
BST2 13
VIN
VP1 VOUT1
IN1-
VIN
VOUT2
IN2-
VIN
IN2-
Dual Independent Outputs
July 09 2007
VOUT1 VP1
VIN
U1
IN1- 1 IN1-
2 COMP1
3 SYNC
4 AGND
SC2443
5 REF
6 REFIN
GDL1 18
PVCC 17
PGND 16
GDL2 15
GDH2 14
BST2 13
VIN
VP1 VOUT1
IN1-
VIN
VIN
Single Output With Current Sharing


PagesPages 20
Télécharger [ SC2443 ]


Fiche technique recommandé

No Description détaillée Fabricant
SC2440 2.5 MHz Dual Switching Regulator Semtech Corporation
Semtech Corporation
SC2441 Very Low Input Voltage 2-Phase Synchronous Step-down Controllers with Step-up Converter Semtech Corporation
Semtech Corporation
SC2441A 1.8V to 20V Input 2-Phase Synchronous Step-down Controllers with Step-up Converter Semtech Corporation
Semtech Corporation
SC2442 High Performance Wide Input Range Dual Synchronous Buck Controller Semtech Corporation
Semtech Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche