|
|
PDF LC78601E Data sheet ( Hoja de datos )
| Número de pieza | LC78601E | |
| Descripción | Compact Disc Player DSP with Built-in Microcontroller | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC78601E (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Ordering number : EN6020
CMOS IC
LC78601E
Compact Disc Player DSP with
Built-in Microcontroller
Overview
The LC78601E CMOS IC implements compact disc
player signal processing, servo control, LCD display, key
input acquisition, and remote controller processing
without requiring control by a separate microcontroller.
The basic functions provided include demodulation of the
EFM signal from the optical pickup, deinterleaving, error
detection and correction, 8× oversampling digital filters,
D/A converter (with built-in analog low-pass filter), LCD
driver, remote controller processing, key acquisition, and
control processing. Thus this IC can provide excellent
cost/performance characteristics when implementing a
low-end CD player.
Functions
• Implements CD play/pause, disc stop, track selection,
fast forward, reverse, repeat mode playback of 1 track or
the whole disc, programmed play (setup, play, and clear)
of up to 16 tracks, and random repeat play under the
control of key input or remote controller input.
<Signal-Processing Block>
• Slices an input high-frequency signal at an accurate
level, converts the EFM signal, and generates a clock
with an average frequency of 4.3218 MHz using a PLL
circuit that performs a phase comparison with an
internal VCO.
• Accurately generates not only the reference clock but
also all necessary internal timings using an external
16.9344MHz crystal.
• Controls the disc motor speed using a frame difference
signal created based on the reproduced clock signal and
a reference clock.
• Performs detection, protection, and interpolation for the
frame synchronizing signal to assure stable data readout.
• Demodulates the EFM signal, converting it to 8-bit
symbol data.
• Separates the subcode data from the EFM signal and
outputs that data to the internal control processing block.
• After applying a CRC check to the subcode Q signal,
outputs that signal to the internal control processing
block.
• Buffers the demodulated EFM signal data in internal
RAM and compensates for ±4 frames of jitter due to
disc speed fluctuations.
• Performs unscrambling and deinterleaving by reordering
the demodulated EFM signal data to the stipulated order.
• Performs error detection and correction and flag
processing (C1: dual errors, C2: dual errors)
• The C2 flags are set based on the C1 flags and the result
of the C2 processing, and the signal is interpolated or
previous value hold is applied based on the C2 flags.
Dual interpolation is adopted in the interpolation circuit.
Previous value hold is applied if two or more
consecutive errors are indicated by the C2 flags.
• Performs track jump, focus start, disc motor start/stop,
muting on/off, track count, and other operations under
control of the internal control processing block.
• Provides digital outputs.
• Generates D/A converter input signals with continuity
improved by 8× oversampling digital filters.
• Includes on-chip third-order noise shaper delta-sigma
D/A converters with built-in analog low-pass filter.
• Digital deemphasis circuit
• Adopts zero-cross muting.
<Display Block>
• On-chip LCD drivers for 2-digit display plus play,
program, repeat, and random indicators
• On-chip bias voltage generator
<Control Processing Block>
• Key matrix circuit with 4 inputs and 2 outputs for an
8-key matrix
• Supports remote controller input.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1898RM (OT) No. 6020-1/11
1 page  
LC78601E
1-Bit D/A Converter Output Block Reference Circuit
Analog output
Left channel
(right channel)
AD725D
(Manufactured by
Shibasoku Ltd.)
Oscillator
element
Oscillator element: 16.9344 MHz
The following oscillator elements are recommended
CSA-309 <C = 8 pF> (Citizen Watch Co., Ltd.)
CSA16.93MXZ040 (C = 15 pF) (Murata Mfg. Co., Ltd.)
CSA16.93MXZ0C3 (built-in capacitor)
(Murata Mfg. Co., Ltd.)
No. 6020-5/11
5 Page 
LC78601E
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 1998. Specifications and information herein are
subject to change without notice.
PS No. 6020-11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LC78601E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC78601E | Compact Disc Player DSP with Built-in Microcontroller | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |